Melded Array Difuser Dowel - which glue?

[billkatz]

As the final part of melded array construction I need to attach the dowel to the front of the piezos. What is the best glue for this? Hot melt? PL? Something else?

[SoundInMotionDJ]

I retrofitted the difuser using PVC. I attached with hot melt glue. 3 years later and I can still pick up a DR200 only holding onto the difuser.

[djtrumptight]

I used hot melt,i also drilled a hole through the top and bottom of the cab,down the center of the dowel.

[whines]

I used a plastic tube of the same width as the dowel and glued it to the array with the same glue used to stick the tweeters together.

[LelandCrooks]

1/2 cpvc pipe. Abs, airplane, or combo plastic pipe glue.