BillFitzmaurice.info

Well done hooking in and getting the rig finished. 21 hours straight for the T48's! Sheesh. Is the reason you have the T48's setup like they are simply so you can stack the J arrays on top? If so, perhaps it would be great to build some platforms to put the J arrays on, so you can cluster the T48's...

More pictures.

I apologize for not being able to update this build thread! I suddenly felt the pressure of the build, and had no time to spare in front of the computer. All the speakers have been completed now, and I must say I am pretty proud of the results. The 4 titan48 speakers were done from start to finish i...

Thanks, bill! Maybe it woulf be a good idea to include that in the plans? I was kind of in panic mode :p

Okay i ran into serious issues! the driver ( delta pro-12A) cannot be installed after the back plate attachment braces have been installed! The driver simply does not go through the opening, it is too big... I could make the braces smaller, but that does't leave enough room for the attachment screws

Quick question. Can i use a polyurethane sealant to seal air leaks and such? Because we can't get PL over here, so i am using another PU glue calles SikaBond. I found a recommendation of that glue here on this site, but it is unfortunately quite runny, so sealing with it is really tough.

Stupidity is mean sometimes. I have seen, and myself committed, many speaker building related atrocities. It just means you're normal. Glad to hear that I am in fact normal! :lol: Here are pictures of one cab with sheaths. I have installed sheaths on all 8 already, but no pictures yet. And for the ...

Stupidity is mean sometimes. This time around, i didn't think it would bite me anymore - but it sure did. When i cut the sheaths, i made 2 in the wrong orientation and put them in the scrap pile. Somehow my brain thought it would be a great idea to bend those over the horn! Anyways, thank you all fo...

Do you have any tips for bending the wood? I am having serious trouble doing so.

Is steaming the plywood a viable option?

They are pulling out of the base material. I have some really long staples, but I am worried they might just be too long
I will go check out your post immediately! And thank you very much for your tips

Okay, I've ran into troubles. And of course, it is with the bended wood. I have stapled the wood at the bottom part all over the place. That bit holds okay. But when I then bend and staple more, the staples just un-staple themselves and the wood bends back. And yes, the wood is cut in the correct or...

Thanks guys! So i made my checkpoint way sooner than i had expected, so i will start going deeper into the build now.

More progress! The baffle on the top cabinet got shifted a bit, i hope it doesn't affect the sound top much...

Hey guys! So today is the first day of this build log. I had all the wood delivered from the CNC machine around noon, and started building immediately. This thread will be updated every day for the next week, as I hope for them to be done this friday! I already had 4 titan48, that is why I am only b...