Duratex offgassing - how long?

Helpful hints on how to build 'em, and where to get the stuff you need.
Post Reply
Message
Author
kesslari
Posts: 114
Joined: Wed Jan 30, 2008 5:36 pm

Duratex offgassing - how long?

#1 Post by kesslari »

For you experienced builders - how long before Duratex stops offgassing?
My cab was sprayed on Thurs. I'm still smelling fumes - pretty mild, but still present.
How long before the duratex stops offgassing and I'm fume-free? My wife is pretty chemical-sensitive, so it's pretty important.

Thanks!
If God had meant for us to use flatwound strings he'd have stopped our hearing at 500 Hz.
- Bill Fitzmaurice

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28916
Joined: Tue May 02, 2006 5:59 pm

Re: Duratex offgassing - how long?

#2 Post by Bill Fitzmaurice »

Leave it outdoors in the summer sun and it's fully cooked in two days. In winter I can't say.

pwfirst
Posts: 147
Joined: Tue Jan 27, 2009 8:11 pm

Re: Duratex offgassing - how long?

#3 Post by pwfirst »

Put a fan on it and it will cure much quicker if the sun is not available. Phil
DR 250's #2
T39's 14 in with 102 #2

User avatar
jcmbowman
Posts: 1263
Joined: Fri Feb 01, 2008 3:40 pm
Location: Detroit, MI

Re: Duratex offgassing - how long?

#4 Post by jcmbowman »

pwfirst wrote:Put a fan on it and it will cure much quicker if the sun is not available. Phil
It cures faster with heat and without humidity.
Low End Junkie for over 20 years.

4 DR250s
4 Tuba36s @ 30" wide
2 ATs
...and a very serious addiction to the smell of BB sawdust and curing PL.

User avatar
Harley
Posts: 5758
Joined: Mon May 08, 2006 2:45 pm
Location: Christchurch, New Zealand - Authorised BFM Cab Builder

Re: Duratex offgassing - how long?

#5 Post by Harley »

jcmbowman wrote:It cures faster with heat and without humidity.
...as does other acrylics. Makes perfect sense. :loler:
ImageSemi-retired: Former Australia and New Zealand Authorised BFM cab builder.

Post Reply