Full grille´s

[djwoo]

How do you secure the grilles to the cabinet, i finish my second pair of OT12, 1/2 inch larger but i don´t know how to screw the grille to the cabinet. Thank´s.

[Mark Coward]

I did mine using some small blocks of wood, hard to do without splitting them. This was for grills with formed edges. For the OT12, I'm thinking to just use flat grill and screw to the flat front edges of the horns on each side, and one or two blocks or strips in the middle.

[Sydney]

I did mine using some small blocks of wood, hard to do without splitting them.

To help prevent splitting, I orient small wood blocks & pre-drill & countersink on the sides that are less inclined to split.
Some types of wood just love to split however.

[djfaceatl]

Hey guys, what is the best place to get the grills???

[gdougherty]

With recent conversations about grills interfering with tweeters I opted to leave them off. Melded arrays look cool and I'm always with them. Less worried anymore about what people see. If they can't get over their eyes and biases that's their problem.

[djwoo]

I want it for my T39, i make a small adjust in the joint between panels 5-6 so i have a 90 degrees cut perfect for a grille.

[djwoo]

And for distribuitors try to google "perforated steel"