Table Tuba compability

Get the lowdown on the down low.
Post Reply
Message
Author
cbarth
Posts: 64
Joined: Sat May 08, 2010 4:41 am

Table Tuba compability

#1 Post by cbarth »

Hi,
Sorry if this has been asked before, but Iwas wondering if the new Faital 10RS430 would work in a wide Table Tuba? VAS is a bit high

FS: 32HZ
QTS: 0,28
VAS: 59,2L

https://faitalpro.com/en/products/LF_Lo ... =151040095

User avatar
Bill Fitzmaurice
Site Admin
Posts: 29067
Joined: Tue May 02, 2006 5:59 pm

Re: Table Tuba compability

#2 Post by Bill Fitzmaurice »

It should work just fine. Vas is the least critical spec. But it's mighty pricey. I can see its value in a pro-sound T24 or T39, but for home theater it's overkill.

cbarth
Posts: 64
Joined: Sat May 08, 2010 4:41 am

Re: Table Tuba compability

#3 Post by cbarth »

Good to know, thanks for the reply! It's quite expensive but here in europe we can get it cheaper than a Dayton Reference 10 inch subwoofer. And with front mounted gasket and superiour build quality it brings some peace of mind

User avatar
Bill Fitzmaurice
Site Admin
Posts: 29067
Joined: Tue May 02, 2006 5:59 pm

Re: Table Tuba compability

#4 Post by Bill Fitzmaurice »

Sure, since you have to import Dayton, but there must be other options at a sensible cost. For instance: https://lavocespeakers.com/product/ssf102-50l/

Post Reply