Grant Bunter

Anything not covered elsewhere.
Message
Author
jimbo7
Posts: 874
Joined: Fri Dec 28, 2012 10:45 am
Location: St. Louis

Re: Grant Bunter

#16 Post by jimbo7 »

Hey Keryn, is there a way we can all "e sign" a guestbook or something that you can print out and display at the service? Just something to show everyone all the friends he had all over the world. Maybe add a short blurb about what he meant to us and others.
BFM builds:
XF212
T24 BP102 24"
2x SLA's 6-5" mids, 9- gt-302's
2x AT 14" MCM 55-2421
TrT 5" MCM 55-2421
AT 18" JBL GTO804
2x OT12 flat array
2x SLA Pro 2-Alpha 6's 2-Goldwoods
2x T39 24" 3012lf
Simplex 10 BP102

Keryn O'Shea
Posts: 559
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Grant Bunter

#17 Post by Keryn O'Shea »

Bruce Weldy wrote: Wed Nov 01, 2023 2:51 pm Please extend our sincerest condolences from all of us here on the forum. He had friends all over the world.
Will do
jimbo7 wrote: Sat Nov 04, 2023 3:41 pm Hey Keryn, is there a way we can all "e sign" a guestbook or something that you can print out and display at the service? Just something to show everyone all the friends he had all over the world. Maybe add a short blurb about what he meant to us and others.
Great idea, I'm sure we can come up with something.
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FA, J12 FA, OT8 CD, OT12 FA, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 MA, XF210. Next J10L

Keryn O'Shea
Posts: 559
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Grant Bunter

#18 Post by Keryn O'Shea »

I'm thinking a message from us on A3 size high quality paper/card inside a picture frame, set as landscape orientation. I have a friend who is a wicked artist and can whip up something simple for us. I like Rich's "Rock on Brother", that could be in a larger font at the top, followed by a brief message underneath, two lines at most I reckon.. thoughts on the message..? Something like "From all corners of the globe, the BFM community offers our sincere gratitude for your contribution..." I don't know.. too formal?
Maybe "Have a beer for us in hell ya bastard" :D Too much probably..
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FA, J12 FA, OT8 CD, OT12 FA, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 MA, XF210. Next J10L

Rich4349
Posts: 881
Joined: Wed Jul 30, 2008 10:18 am
Location: Kankakee, IL

Re: Grant Bunter

#19 Post by Rich4349 »

Why not both?!
2 DR250s, 2 27" Lab15 T-60s, 2 30" Neo Titan 39s, 1 Autotuba...and looking for more!

Keryn O'Shea
Posts: 559
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Grant Bunter

#20 Post by Keryn O'Shea »

Rich4349 wrote: Thu Nov 09, 2023 8:32 am Why not both?!
:lol: That did cross my mind mate, Grant would get a kick out of that, however l think maybe not go full bogan!
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FA, J12 FA, OT8 CD, OT12 FA, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 MA, XF210. Next J10L

User avatar
Tom Smit
Posts: 7569
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Grant Bunter

#21 Post by Tom Smit »

My preference is the formal version.
TomS

User avatar
Seth
Posts: 3012
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Grant Bunter

#22 Post by Seth »

Tom Smit wrote: Thu Nov 09, 2023 10:26 pm My preference is the formal version.
+1
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Keryn O'Shea
Posts: 559
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Grant Bunter

#23 Post by Keryn O'Shea »

Roger, let's go formal. One more line should do it, if anyone thinks of something to add over the next week, I'll ponder as well, & then have it drawn up.
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FA, J12 FA, OT8 CD, OT12 FA, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 MA, XF210. Next J10L

Keryn O'Shea
Posts: 559
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Grant Bunter

#24 Post by Keryn O'Shea »

What do you guys think?
Attachments
20231118_110328.jpg
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FA, J12 FA, OT8 CD, OT12 FA, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 MA, XF210. Next J10L

Bruce Weldy
Posts: 8539
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Grant Bunter

#25 Post by Bruce Weldy »

Sounds good. Thanks for doing this.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Rich4349
Posts: 881
Joined: Wed Jul 30, 2008 10:18 am
Location: Kankakee, IL

Re: Grant Bunter

#26 Post by Rich4349 »

Keryn O'Shea wrote: Fri Nov 17, 2023 8:06 pm What do you guys think?
Will his family know what BFM stands for?
2 DR250s, 2 27" Lab15 T-60s, 2 30" Neo Titan 39s, 1 Autotuba...and looking for more!

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28916
Joined: Tue May 02, 2006 5:59 pm

Re: Grant Bunter

#27 Post by Bill Fitzmaurice »

My family wouldn't, as my name isn't Bill Fitz Maurice. I don't know who came up with BFM but it wasn't me. I'd use the actual address of the Forum.

User avatar
Seth
Posts: 3012
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Grant Bunter

#28 Post by Seth »

I agree. It's always bugged me when people use BFM. Perhaps "the audio community at billfitzmaurice.info"

And please add something to express that he is missed.

Thanks for heading this up Keryn :thumbsup:
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Keryn O'Shea
Posts: 559
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Grant Bunter

#29 Post by Keryn O'Shea »

Bruce Weldy wrote: Sat Nov 18, 2023 8:35 am Sounds good. Thanks for doing this.
Too easy, thank you guys for the help
Bill Fitzmaurice wrote: Sat Nov 18, 2023 11:08 am ...my name isn't Bill Fitz Maurice..
Wait.. what 😄
Attachments
20231119_074204.jpg
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FA, J12 FA, OT8 CD, OT12 FA, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 MA, XF210. Next J10L

User avatar
Seth
Posts: 3012
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Grant Bunter

#30 Post by Seth »

Perfect
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Post Reply