table tuba

[mino00]

https://www.sweetwater.com/c1085--B_Amp ... lsrc=aw.ds
this speaker good for table tuba
thanks

[mino00]

https://www.parts-express.com/Dayton-Au ... H5EALw_wcB
how a bout this one compare to the above speaker.
thanks

[Grant Bunter]

Both those drivers aren't in the plans as recommended.

Go to PE and search for Dayton Audio DCS205-4, which is a recommended 8" driver, and sells for $75.

If you want a 10" driver, the Dayton DCS255-4 is a recommended driver, at $99...

[mino00]

Thanks for quick response on the other thread Biil recomended Dayton Audio LS10-44 10" Low Profile Subwoofer Dual 4 Ohm , May be i m wrong
thanks

[Grant Bunter]

Thanks for quick response on the other thread Biil recomended Dayton Audio LS10-44 10" Low Profile Subwoofer Dual 4 Ohm , May be i m wrong
thanks

The two I put up are certainly in my (now very old) plans.
If Bill has said yes to something, it's good.

The LS10-44 is a dual voice coil variant though.
So it's going to be hard to make that 4 ohms if that's what you're aiming for.