XF 210

A gallery where our Authorized Builders can show off their cabs and provide links to their own websites.
Post Reply
User avatar
Strange Kevin
Posts: 164
Joined: Fri May 19, 2017 3:02 pm
Location: Scottsdale AZ

XF 210

#1 Post by Strange Kevin »

Here's an XF210 slightly modified to fit the fancy metal corners the client sent to me.
The corners assume they will be put on a square cabinet so the angled front face becomes a problem and the front corners wrap around to hook the inside of the frame.

The only thing I changed here is the outer frame of the xf is built using 3/4" and the front angle is adjusted to end at a 90° for the last inch or so at the top and bottom. (Look at the side profile)
Last edited by Strange Kevin on Tue Jan 12, 2021 3:25 am, edited 1 time in total.
Authorized Builder - Phoenix AZ.
Main Rig - 6 DR200s - 6 T48s (30")
SLA Pros for the smaller stuff.

User avatar
Tom Smit
Posts: 7482
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: XF 2120

#2 Post by Tom Smit »

Nice! That is a good adaptation for the cab corners. Well done. :clap:
You did a real fine job on that cab!

Post Reply