Dual THTLP Build

Post your build odyssey here.
Post Reply
Message
Author
Remy.Alexander
Posts: 15
Joined: Wed May 22, 2019 9:56 pm
Location: Canonsburg, PA

Dual THTLP Build

#1 Post by Remy.Alexander »

Greetings,

New Here, Just got my plans yesterday and i'm super excited and a little intimidated. Ive built a few sub and speaker cabs before but that was just standard stuff.

Im about to start construction, as soon as I can source the Plywood at a good price. Im building Dual RSS390HF- 15"D X 21"W X 72"H. I already have the dual woofers and a Inuke 3000DSP so im off to a good start.

Still working on a cutlist- so i can visually make it a bit more idiot proof....yes im a idiot at times... Attached is my cut-list so-far which I think I have correct...

This morning I cut and trimmed a bunch of boards I think they were 2" X 3" - lol, I grabbed wrong boards at Home Depot so i cut them up today as "guides" . Not a big waste as they were only $2.07 each for 8'. ran the sides through the table saw to trim them off and make a flatter edge.

Anyway all tips and tricks welcome... FIY I tend to be a idiot with math and angles so If i post something stupid, please educate me..I welcome it so long as not just being a A-hole :)

And Bill is a awesome guy, We ordered the plans and had them in like a hour lol..Really looking forward to bringing his creation into our home. Thank You
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Tom Smit
Posts: 7695
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Dual THTLP Build

#2 Post by Tom Smit »

Enjoy your build!

I answered your question in the other thread. It would be best to continue here, and ask the remaining build questions here, as well.
TomS
Top
Grant Bunter
Posts: 6912
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:
Contact Grant Bunter

Re: Dual THTLP Build

#3 Post by Grant Bunter »

I know this might seem a bit pedantic, but are you building 1 dual loaded cab, or 2 single loaded cabs?
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
Top
Remy.Alexander
Posts: 15
Joined: Wed May 22, 2019 9:56 pm
Location: Canonsburg, PA

Re: Dual THTLP Build

#4 Post by Remy.Alexander »

Tom Smit wrote: ↑Sun May 26, 2019 11:43 pm Enjoy your build!

I answered your question in the other thread. It would be best to continue here, and ask the remaining build questions here, as well.
Thanks, I appreciate it. I'll make the adjustments :)



Grant- I'm building two single loaded thtlp
Top
Remy.Alexander
Posts: 15
Joined: Wed May 22, 2019 9:56 pm
Location: Canonsburg, PA

Re: Dual THTLP Build

#5 Post by Remy.Alexander »

I believe I have it correct, I am "referring" to panels in different terms which may confuse. I plan to make the throat face forward. Its showing as ill need 2 and 1/4 sheets with a lot of scrap, so I think ill have enough for braces.
You do not have the required permissions to view the files attached to this post.
Top
Remy.Alexander
Posts: 15
Joined: Wed May 22, 2019 9:56 pm
Location: Canonsburg, PA

Re: Dual THTLP Build

#6 Post by Remy.Alexander »

So what do I run these at when I complete the build? Ive read they exceed xmax at 22hz, So the'll need a HPF like a ported cab? These will be corner loaded- and all about that shake- I love watching movies and feeling everything that was meant to be felt. My kids make me put on stuff like "bass I love you" because it vibrates the couch so much, I like the 5/6hz drop :)
Top
Post Reply

Return to “Build Threads”