SLA Pro build incoming

Message

CoronaOperator · #31 Post by **CoronaOperator** » Sun Apr 13, 2014 7:30 am

Bill Fitzmaurice wrote:
sine143 wrote: anyone have any tips for applying a smooth duratex finish? I'm getting orange peel
It's supposed to do that, the tex in DuraTex stands for 'texture'.

+1 The texture hides flaws and like a serrated knife, only the bumps show wear, making the cabinet look new longer. If you want smooth, hit up your local paint store.

sine143 · #32 Post by **sine143** » Sun Apr 20, 2014 9:34 pm

a tiny bit of progress, sorry been focusing on the subs. and waiting for my resistors to arrive from PE....

djtrumptight · #33 Post by **djtrumptight** » Mon Apr 21, 2014 11:04 am

Sine post some info about the grills,my SLA Pro's are ready for bondoing and painting,my crossover components and tweet's were shipped out today from Leland.Are you doing the whole filter or just placing the 4 ohm resistor in place ?

sine143 · #34 Post by **sine143** » Mon Apr 21, 2014 11:47 am

I'm doing the filter specced in the plans. I'm waiting on the 4 ohm resistors that were backordered. will update about the grilles when I get back from lunch.

sine143 · #35 Post by **sine143** » Sat May 10, 2014 12:17 pm

finished up the SLAs, sound good. will start working on eq in a bit.

djtrumptight · #36 Post by **djtrumptight** » Sun May 11, 2014 2:36 am

Sweet.I just used my SLA Pro's for the first time tonight along with 2 T-39's and these things are loud as hell.Medium sized venue,no V Plate,the most convenient place to put them (T 39's) was right in front of the stage which was only about 3 feet high,facing the stage.

sine143 · #37 Post by **sine143** » Sun May 11, 2014 1:07 pm

you went with the dayton as well?

djtrumptight · #38 Post by **djtrumptight** » Mon May 12, 2014 2:15 am

Yep,i went with the Daytons.To be honest,i have been scared to crank them and give them the 400 or so watts that i have been told they can take,i think it would take a pair of v plated corner loaded T39's to really keep up with them.I think my next builds this fall will be 4 SLA Pro's and 4 slim T 39's,BP102 loaded,all to be painted with white Duratex to be rented out for weddings.

sine143 · #39 Post by **sine143** » Mon May 12, 2014 4:55 pm

short youtube vid of the setup. very low volume, sounds very clean though in real life.

djtrumptight · #40 Post by **djtrumptight** » Thu May 15, 2014 12:20 am

Sounds real sweet,so sweet that the first nice day i get im taking my DR's outside and do some EQing.Real good sound.

: sla pro pic.JPG (35.14 KiB) Viewed 1506 times

miked · #41 Post by **miked** » Thu May 15, 2014 2:15 pm

djtrumptight wrote:Sounds real sweet,so sweet that the first nice day i get im taking my DR's outside and do some EQing.Real good sound.

sla pro pic.JPG

I like that look. Very "monolithic looking". Great job!

BillFitzmaurice.info

SLA Pro build incoming

Re: SLA Pro build incoming

Re: SLA Pro build incoming

Re: SLA Pro build incoming

Re: SLA Pro build incoming

Re: SLA Pro build incoming

Re: SLA Pro build incoming

Re: SLA Pro build incoming

Re: SLA Pro build incoming

Re: SLA Pro build incoming

Re: SLA Pro build incoming

Re: SLA Pro build incoming