Piezo Tweeter in Brazil

Post your build odyssey here.
Post Reply
Message
Author
User avatar
marcoaandrade
Posts: 35
Joined: Wed Aug 24, 2011 5:08 pm

Piezo Tweeter in Brazil

#1 Post by marcoaandrade »

Dear Bill

Since there is no Goldwood dealers or resellers in Brazil I think this could be the only alternative to build BFM speakers with melded array piezos.

Please take a look at the specs. I believe this alternative can achieve reasonable results, but "you are the expert".

If you believe it too, I can send a sample to you for a trial evaluation...

Cheers,

Marco
Attachments
Tweeter Piezo TLC-4 - LeSon (2).jpg
Top
User avatar
marcoaandrade
Posts: 35
Joined: Wed Aug 24, 2011 5:08 pm

Re: Piezo Tweeter in Brazil

#2 Post by marcoaandrade »

Bill

Here goes a picture of the tweeter...

Cheers
Attachments
TLC-4.jpg
TLC-4.jpg (5.32 KiB) Viewed 797 times
Top
User avatar
Bill Fitzmaurice
Site Admin
Posts: 28967
Joined: Tue May 02, 2006 5:59 pm

Re: Piezo Tweeter in Brazil

#3 Post by Bill Fitzmaurice »

It appears OK.
Top
User avatar
marcoaandrade
Posts: 35
Joined: Wed Aug 24, 2011 5:08 pm

Re: Piezo Tweeter in Brazil

#4 Post by marcoaandrade »

Bill Fitzmaurice wrote:It appears OK.
Bill

It appears to me as well, but my concern is on the low end response, since it is rated from 5k to 20k @ 108dB sensitivity. According to GT 1016 spects it is rated from 3.5K to 27...although i can see from chart (if it is eliable) that it is pretty efficient around 4K.

Please feel free to raise any comment! Maybe I am completely crazy!

Cheers
Top
Post Reply

Return to “Build Threads”