DCX2496 remote??

The hows and whys of running sound.
Post Reply
Message
Author
Chris Betancourt
Posts: 397
Joined: Fri Aug 08, 2008 2:44 pm
Location: Levittown Puerto Rico

DCX2496 remote??

#1 Post by Chris Betancourt »

Hey guys has anyone used the remote software for DCX and what kind of connection did you use?
Christopher Betancourt
Authorized Builder
Puerto Rico
Built:
4xTitan 39-3012LF, 2xWedgehorn 8, 4xOT12, 8xOT12J on the works.
All running w/SAC or DL1606
On the table:
too much work!! LOL
Future:
It's a secret for now. Shhhh....
Top
User avatar
BrentEvans
Posts: 3041
Joined: Thu Oct 09, 2008 10:38 am
Location: Salisbury, NC

Re: DCX2496 remote??

#2 Post by BrentEvans »

It requires a serial connection. You'll need a USB to serial adapter. Is not the best piece of software, but it works.
99% of the time, things that aren't already being done aren't being done because they don't work. The other 1% is split evenly between fools and geniuses.
Top
Chris Betancourt
Posts: 397
Joined: Fri Aug 08, 2008 2:44 pm
Location: Levittown Puerto Rico

Re: DCX2496 remote??

#3 Post by Chris Betancourt »

BrentEvans wrote:It requires a serial connection. You'll need a USB to serial adapter. Is not the best piece of software, but it works.
Do you mean one of these??
usbtoserial11.jpg
USB Port to 9-pin Serial RS-232 1 Meter Cable for PC & Mac, For Legacy Devices
Christopher Betancourt
Authorized Builder
Puerto Rico
Built:
4xTitan 39-3012LF, 2xWedgehorn 8, 4xOT12, 8xOT12J on the works.
All running w/SAC or DL1606
On the table:
too much work!! LOL
Future:
It's a secret for now. Shhhh....
Top
gzc_stageTech
Posts: 303
Joined: Thu Oct 05, 2006 7:31 pm
Location: Wichita, KS

Re: DCX2496 remote??

#4 Post by gzc_stageTech »

that's what I use, yes.
Top
User avatar
BrentEvans
Posts: 3041
Joined: Thu Oct 09, 2008 10:38 am
Location: Salisbury, NC

Re: DCX2496 remote??

#5 Post by BrentEvans »

That looks right. Make sure it has drivers to support your operating system, and check what serial port it takes over. Most of the time com1 works best. You can change the port in the hardware config.
99% of the time, things that aren't already being done aren't being done because they don't work. The other 1% is split evenly between fools and geniuses.
Top
Chris Betancourt
Posts: 397
Joined: Fri Aug 08, 2008 2:44 pm
Location: Levittown Puerto Rico

Re: DCX2496 remote??

#6 Post by Chris Betancourt »

Specifications:
Converts a standard 9-pin serial device to a USB port on your computer
Complies with USB Specification v1.1 & USB CDC v1.1
Compatible with USB Spec 2.0
Supports RS232 Serial Interface (standard 9-pin serial)
USB full speed communication and Bus Powered
Single Cable USB to Serial communications
Detects USB suspend condition
Supports Plug & Play specification
Supports Automatic handshake mode
Supports up to 1 Mbps data transfer rate
Support Remote wake-up and power management
Draws power directly from USB
Win 98SE, ME, 2000, XP, VISTA, WIN7 & Macintosh OS 8.6 thru 10.xx
Does NOT work with Mac OS X Leopard or newer
Christopher Betancourt
Authorized Builder
Puerto Rico
Built:
4xTitan 39-3012LF, 2xWedgehorn 8, 4xOT12, 8xOT12J on the works.
All running w/SAC or DL1606
On the table:
too much work!! LOL
Future:
It's a secret for now. Shhhh....
Top
Post Reply

Return to “Mixers and Processors”