cutting circles with dremel?

Message

greg · #1 Post by **greg** » Fri Jan 28, 2011 9:54 pm

is there an attachment for cutting circles with a dremel rotary tool?

Fri Jan 28, 2011 10:20 pm

greg wrote:is there an attachment for cutting circles with a dremel rotary tool?

There is, but I wouldn't use it for thicker than 1/4" plywood.

jjohnson · #3 Post by **jjohnson** » Sat Jan 29, 2011 1:31 am

+1

I tried it on 1/2" and it just ended up burning the wood.

Israel · #4 Post by **Israel** » Sat Jan 29, 2011 11:17 am

a $20 jig saw is a better bet probably not much more $$ than the atachment for the dremel

jswingchun · #5 Post by **jswingchun** » Mon Jan 31, 2011 12:43 pm

Israel wrote:a $20 jig saw is a better bet probably not much more $$ than the atachment for the dremel

Or a cheap-ish router and a homemade circle jig.

DJ Nada · #6 Post by **DJ Nada** » Tue Oct 16, 2012 7:59 pm

I used a Dremel circle cutter to cut circles in 1/2" plywood. It works well and was faster than I expected. Just follow the directions and let the speed do the cutting.

PulseMan · #7 Post by **PulseMan** » Wed Oct 17, 2012 6:46 am

DJ Nada wrote:I used a Dremel circle cutter to cut circles in 1/2" plywood. It works well and was faster than I expected. Just follow the directions and let the speed do the cutting.

+1 that's what I used to cut my Wedgehorn circles out and yes it was quite fast too.

Jose

BillFitzmaurice.info

cutting circles with dremel?

cutting circles with dremel?

Re: cutting circles with dremel?

Re: cutting circles with dremel?

Re: cutting circles with dremel?

Re: cutting circles with dremel?

Re: cutting circles with dremel?

Re: cutting circles with dremel?