Omni 15 Tallboy - my first build
Re: Omni 15 Tallboy - my first build
looks excellent so far. it really is addictive to build bill's cabs. it's been 2 years since i started my first biuld and i haven't stopped since.
building BFM speakers isn't a hobby , it's an addiction
1 x THT
1 x autotuba
2 x dr250 melded
2 x wedgehorn 10
2 x tlah
1 x THT
1 x autotuba
2 x dr250 melded
2 x wedgehorn 10
2 x tlah
Re: Omni 15 Tallboy - my first build
I should have bought the CD... 
Re: Omni 15 Tallboy - my first build
New pics
You do not have the required permissions to view the files attached to this post.
Re: Omni 15 Tallboy - my first build
I cut the mid horn panels today, just need to do the baffle holes...
By the way, doesn't the tweeter need a grill? The APT 80 has a sharp cone in the middle and I wouldn't want anybody to hurt their fingers
By the way, doesn't the tweeter need a grill? The APT 80 has a sharp cone in the middle and I wouldn't want anybody to hurt their fingers
-
bitSmasher
- Posts: 628
- Joined: Fri May 30, 2008 2:55 am
- Location: Sydney, Aus.
Re: Omni 15 Tallboy - my first build
people that stick their fingers in a speaker deserve to get stabbed 
Re: Omni 15 Tallboy - my first build
I wasn't worried about them, to be honest 
but leaving it without a grill doesn't seem like a good idea. The plans don't mention anything like a grill...
but leaving it without a grill doesn't seem like a good idea. The plans don't mention anything like a grill...
You do not have the required permissions to view the files attached to this post.
Re: Omni 15 Tallboy - my first build
Maybe you should use a piece of scrap wood when fastening, before piercing that kind of holes. You will avoid marks.
-
Bill Fitzmaurice
- Site Admin
- Posts: 29105
- Joined: Tue May 02, 2006 5:59 pm
Re: Omni 15 Tallboy - my first build
Anyone sticking their fingers into my cab would end up losing them.Rickyvt wrote:I wouldn't want anybody to hurt their fingers
Re: Omni 15 Tallboy - my first build
I only needed the plug, the rest of the plywood is scrap, so any marks don't matterrainbass wrote:Maybe you should use a piece of scrap wood when fastening, before piercing that kind of holes. You will avoid marks.
You do not have the required permissions to view the files attached to this post.
Re: Omni 15 Tallboy - my first build
if want you can use a grill. the plans don't mention one but it's been done before. mine have grils to because i rent them out and it avoids crap getting into the horn
greetz ketoet
greetz ketoet
building BFM speakers isn't a hobby , it's an addiction
1 x THT
1 x autotuba
2 x dr250 melded
2 x wedgehorn 10
2 x tlah
1 x THT
1 x autotuba
2 x dr250 melded
2 x wedgehorn 10
2 x tlah
Re: Omni 15 Tallboy - my first build
It might be an unnecessary cost but I would like to be sure. I'll google for them!
Meanwhile I'm ready to put the Midrange Horn together. I'll post some pics later on...
Meanwhile I'm ready to put the Midrange Horn together. I'll post some pics later on...
Re: Omni 15 Tallboy - my first build
The mid horn took a while...
You do not have the required permissions to view the files attached to this post.
Re: Omni 15 Tallboy - my first build
The phase plug in the baffle panel is slightly larger (about 1/16") than the one glued on it, which has the correct size. Should I correct that or is there nothing to worry about?
Re: Omni 15 Tallboy - my first build
Dry fitting. It's a very, very tight fit. Don't think I need glue
I will have to do some sanding before glueing it
I will have to do some sanding before glueing it
You do not have the required permissions to view the files attached to this post.
Re: Omni 15 Tallboy - my first build
very nice looking cab. keep up te good work.
wish i could make so much progress each day
greetz ketoet
wish i could make so much progress each day
greetz ketoet
building BFM speakers isn't a hobby , it's an addiction
1 x THT
1 x autotuba
2 x dr250 melded
2 x wedgehorn 10
2 x tlah
1 x THT
1 x autotuba
2 x dr250 melded
2 x wedgehorn 10
2 x tlah