I Haven't ignored anything. I have followed the plans. Per plan the high pass is currently at 35 Hz and will be dropped to 30 Hz when I bring the other two cabs online. The plans don't have much to say about Crossover points. The SPL charts run out to 200 Hz, after that, the discussions on the forum have been more about adjusting crossover point to sound the best. A lower Crossover point may very well work far better. None the less, your commentary is presumptuous and acidic. I can tell you, I will be ignoring any of your future comments due to the lack of constructive usefulness. Feel free to stay out of the threads I have created
Good for you man.
 this is a fantastic forum, but the pompus "holier than thou" attacks make beginners like me shy away.  excellent work on these cabs, by the way.  i am about 75% done with my first t-48, wanted to build a single before i tried mass-producing any
  this is a fantastic forum, but the pompus "holier than thou" attacks make beginners like me shy away.  excellent work on these cabs, by the way.  i am about 75% done with my first t-48, wanted to build a single before i tried mass-producing any



 
   
   
   
   
  
   
   
  