Another tme alignment question

[J_Dunavin]

Had anyone come up with a chart for time alignment for the Tubas and Titans?
I know that there are a lot of variables, but I'm looking for what the bass line should be. ( ha get it, bass, base ya ok)
Anyway it would be nice to say if you have a T24 you need to set in X ms of delay as a starting point.

[J_Dunavin]

So if my dr's are in roughly the same plane as my T24's, how much delay should i dial in on the dr's?

[DJPhatman]

So if my dr's are in roughly the same plane as my T24's, how much delay should i dial in on the dr's?

0. None. Nada. Ziltch.

[Bruce Weldy]

So if my dr's are in roughly the same plane as my T24's, how much delay should i dial in on the dr's?

Doing some quick math on the plans, it looks like the horn path is around 8 feet. So, you can add 7-9ms if you want. Doubt that you'll actually hear any difference.


Now, delaying the subs and the mains to match up with the backline will be much more noticeable.

[Bill Fitzmaurice]

Doing some quick math on the plans, it looks like the horn path is around 8 feet.

From which you have to deduct the DR path length. The result is inaudible.

[J_Dunavin]

Well dang
For whatever reason i thought that you were supposed to add some in there. Out it comes next gig!

[DJPhatman]

So if my dr's are in roughly the same plane as my T24's, how much delay should i dial in on the dr's?

0. None. Nada. Ziltch.