Feed Table Question

Helpful hints on how to build 'em, and where to get the stuff you need.
Post Reply
Message
Author
User avatar
doncolga
Posts: 1967
Joined: Thu Jul 01, 2010 3:01 pm
Location: Statesboro, GA
Contact:
Contact doncolga

Feed Table Question

#1 Post by doncolga »

Hi all,

I've acquired a table saw that appears to be in better working condition than the one I had before, but I still need to try it out. I'm assuming a feed table is a good thing to have and easy to build, but I don't think I need a huge one. What suggestions for size, etc, would you all have for a feed table? Does anyone have any pictures?

Thanks!

Donny
Donny Collins
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
Top
Frederic Gelinas
Posts: 566
Joined: Wed Jul 23, 2008 10:03 am
Location: Saint-Pie, Quebec, Canada

Re: Feed Table Question

#2 Post by Frederic Gelinas »

Width: same as your table saw surface
Lenght: Minimum of half of your longest cut. If you think you will need to cut 8 feet long, you will need at least a 4 feet long outfeed table.
Frédéric Gélinas, HF Audio
Authorized Builder
HFAudio.ca
Free tone Generator
Saint-Hyacinthe, Québec, Canada
Top
lincsoldbird
Posts: 176
Joined: Wed Nov 03, 2010 5:15 am
Location: Lincs UK

Re: Feed Table Question

#3 Post by lincsoldbird »

Frederic Gelinas wrote:Width: same as your table saw surface
Lenght: Minimum of half of your longest cut. If you think you will need to cut 8 feet long, you will need at least a 4 feet long outfeed table.
+1
Make the top out of some thing nice and smooth so the wood [ply] slides nice and easy over it.
I would make the width wider than the saw table,if you,ve got room,to give more support if ripping a strip off a wide board.
Image

Here,s my little saw , note the on off switch. Lost the nob when I moved it 15 years ago, must replace it some day.
built 4 T30 24in BP102 now sold 2 DR280
2 speakerplans 1850, 2 MT102 ,2 X15, 1 G sub now sold
2 T60,s Built plus 4 DR280,s in the build
Top
Bruce Weldy
Posts: 8678
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Feed Table Question

#4 Post by Bruce Weldy »

Here's mine.....outfeed, assembly, work table. Removable/replaceable fiberboard top and power on opposite corners.
Workbench4 10-03 small.JPG
You do not have the required permissions to view the files attached to this post.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210

"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
Top
Frederic Gelinas
Posts: 566
Joined: Wed Jul 23, 2008 10:03 am
Location: Saint-Pie, Quebec, Canada

Re: Feed Table Question

#5 Post by Frederic Gelinas »

Here's mine. It's 4'x8'. I should move it back closer to the saw.
You do not have the required permissions to view the files attached to this post.
Frédéric Gélinas, HF Audio
Authorized Builder
HFAudio.ca
Free tone Generator
Saint-Hyacinthe, Québec, Canada
Top
lincsoldbird
Posts: 176
Joined: Wed Nov 03, 2010 5:15 am
Location: Lincs UK

Re: Feed Table Question

#6 Post by lincsoldbird »

More saw porn anyone?
built 4 T30 24in BP102 now sold 2 DR280
2 speakerplans 1850, 2 MT102 ,2 X15, 1 G sub now sold
2 T60,s Built plus 4 DR280,s in the build
Top
wounded horse
Posts: 315
Joined: Sun Jul 12, 2009 9:18 am
Location: Lincoln UK

Re: Feed Table Question

#7 Post by wounded horse »

Come on Paul, show em what else you got going down in that workshop. It's something to feast your eyes on.
Top
lincsoldbird
Posts: 176
Joined: Wed Nov 03, 2010 5:15 am
Location: Lincs UK

Re: Feed Table Question

#8 Post by lincsoldbird »

You mean the little boat? or the T60 :lol:
built 4 T30 24in BP102 now sold 2 DR280
2 speakerplans 1850, 2 MT102 ,2 X15, 1 G sub now sold
2 T60,s Built plus 4 DR280,s in the build
Top
wounded horse
Posts: 315
Joined: Sun Jul 12, 2009 9:18 am
Location: Lincoln UK

Re: Feed Table Question

#9 Post by wounded horse »

The Barge/sub combined. pics, man, pics. Don't be shy.
Top
shane2943
Posts: 286
Joined: Fri Jun 18, 2010 10:32 am

Re: Feed Table Question

#10 Post by shane2943 »

Here's my monster that takes up 1/2 the garage:

Image

The outfeed is made of "melenine" which is basically 3/4" particle board laminated on both sides with white formica. Wood slides real easy on it. That's a 4'X6' out feed.
Top
lincsoldbird
Posts: 176
Joined: Wed Nov 03, 2010 5:15 am
Location: Lincs UK

Re: Feed Table Question

#11 Post by lincsoldbird »

That looks like 5 Harley,s. Well tidy :mrgreen: And a bike aswell.
built 4 T30 24in BP102 now sold 2 DR280
2 speakerplans 1850, 2 MT102 ,2 X15, 1 G sub now sold
2 T60,s Built plus 4 DR280,s in the build
Top
User avatar
Harley
Posts: 5758
Joined: Mon May 08, 2006 2:45 pm
Location: Christchurch, New Zealand - Authorised BFM Cab Builder

Re: Feed Table Question

#12 Post by Harley »

shane2943 wrote:Image
Image

Well deserved :mrgreen:
ImageSemi-retired: Former Australia and New Zealand Authorised BFM cab builder.
Top
User avatar
LelandCrooks
Posts: 7242
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:
Contact LelandCrooks

Re: Feed Table Question

#13 Post by LelandCrooks »

I can only sigh with envy. I'll never get 5 harleys. :cry:
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
Top
User avatar
Harley
Posts: 5758
Joined: Mon May 08, 2006 2:45 pm
Location: Christchurch, New Zealand - Authorised BFM Cab Builder

Re: Feed Table Question

#14 Post by Harley »

LelandCrooks wrote:I can only sigh with envy. I'll never get 5 harleys. :cry:
You could .....if you could figure a way for me so that when I move to Parsons I can get an income and look after your workshop :mrgreen:
ImageSemi-retired: Former Australia and New Zealand Authorised BFM cab builder.
Top
User avatar
AntonZ
Posts: 2705
Joined: Sun May 14, 2006 6:00 am
Location: NL

Re: Feed Table Question

#15 Post by AntonZ »

And he's had one Harley, even though it was only temporary :cowboy:
Top
Post Reply

Return to “Tips, Techniques and Supplier Links”