One minute epoxy?....think again.

[Radian]

When buying epoxy for your t-nuts or h-nuts, stick to the 5-30 minute stuff.

Others here have warned , but I figured I'd get a little more working time than this....I mean come on?! The grub didn't even make it onto my workpiece.

I broke the internal seal, mixed it for 15 seconds, then pooped out a stupid-hot epoxy turd that nearly melted my flesh. It cured solid before I could even lay down a bead. I've heard of quick set epoxy, but this mix borders on useless. If I had been building speakers, I'd have been most unhappy at the delay of game.

[67baja]

I'm dying here. What a great description of uselessness! "then pooped out a stupid-hot epoxy turd that nearly melted my flesh." Sounds like a bad weekend in Tijuauna.

[bassmonster]

"then pooped out a stupid-hot epoxy turd that nearly melted my flesh." Sounds like a bad weekend in Tijuauna.

+1 on the 1 minute epoxy Radian. Even making plastic models it's almost useless, plus it gets really hot as you mentioned.

[subharmonic]

+1 to the TJ comment. Been there done that

[BoostFab]

these type of glue are meant to mix right on the area where you would end up applying the glue to; unless you mix a little bit at a time quickly.