BBE DS48

The hows and whys of running sound.
Post Reply
Message
Author
wounded horse
Posts: 315
Joined: Sun Jul 12, 2009 9:18 am
Location: Lincoln UK

BBE DS48

#1 Post by wounded horse »

Any comments/recommendations/avoid like the plague on this DSP box? All replies welcome as there's one on ebay now with 2 odd hours to go.

SeisTres
Posts: 2688
Joined: Fri Apr 24, 2009 3:53 am
Location: Dallas, tx

Re: BBE DS48

#2 Post by SeisTres »

BBE is a nice brand for that. It's on the same level as the lower lever dbx processors (dbx driverack pa). I believe monomer and someone else run this set up. Some prefer them over the behringer ones.
Built:6 t39, t18, 4 Jack10, 2 autotuba, 2 SLA,2 wedge, 2 TT, 2 Tritrix, curved sla, 2 otop212, 2 SLA pros, Ported 8" sub, 2 ported 210, dual ported 8" sub

User avatar
loudsubz
Posts: 389
Joined: Tue Dec 28, 2010 8:13 pm
Location: Mississauga, Ontario, Canada

Re: BBE DS48

#3 Post by loudsubz »

I picked up one 2 weeks ago for $200 cdn.

It was basically brand new just opened to test the box to see if it was working (was a return as his original had taken a brown out and messed up the power supply).

I am tweaking it now and going to use it. From the research I did it was a little limited on features compared to the DCX2496 but from what I could tell people were happy about is reliability and rock solid performance, that was a bigger factor to me.

Monomer
Posts: 989
Joined: Mon May 22, 2006 2:55 pm
Location: Metro-Detroit, MI

Re: BBE DS48

#4 Post by Monomer »

I love mine, for the money.


I have blown it up, running at low voltages (96VAC on the furman) BBE replaced it with a new unit, all in less then a week.


The only downfall is the limited delay and non-graphic eq's. Otherwise, it's a fantastic unit.
-AutoTuba; Tang Band 8 inch (x1)
-T39; KappliteLF, 22 wide (x2)
-More to come!

User avatar
BrentEvans
Posts: 3041
Joined: Thu Oct 09, 2008 10:38 am
Location: Salisbury, NC

Re: BBE DS48

#5 Post by BrentEvans »

Monomer wrote: The only downfall is the limited delay and non-graphic eq's. Otherwise, it's a fantastic unit.
You can actually tune with parametric EQ far more precisely than with a graphic. It's just a learning curve.
99% of the time, things that aren't already being done aren't being done because they don't work. The other 1% is split evenly between fools and geniuses.

User avatar
AntonZ
Posts: 2689
Joined: Sun May 14, 2006 6:00 am
Location: NL

Re: BBE DS48

#6 Post by AntonZ »

BrentEvans wrote:You can actually tune with parametric EQ far more precisely than with a graphic. It's just a learning curve.
Is that similar to the smiley curve?
;)

User avatar
BrentEvans
Posts: 3041
Joined: Thu Oct 09, 2008 10:38 am
Location: Salisbury, NC

Re: BBE DS48

#7 Post by BrentEvans »

AntonZ wrote:
BrentEvans wrote:You can actually tune with parametric EQ far more precisely than with a graphic. It's just a learning curve.
Is that similar to the smiley curve?
;)
Complete opposite, actually. :owned:
99% of the time, things that aren't already being done aren't being done because they don't work. The other 1% is split evenly between fools and geniuses.

Monomer
Posts: 989
Joined: Mon May 22, 2006 2:55 pm
Location: Metro-Detroit, MI

Re: BBE DS48

#8 Post by Monomer »

BrentEvans wrote:
Monomer wrote: The only downfall is the limited delay and non-graphic eq's. Otherwise, it's a fantastic unit.
You can actually tune with parametric EQ far more precisely than with a graphic. It's just a learning curve.
only 5 bands per output.


lot harder to tweak on the fly.
-AutoTuba; Tang Band 8 inch (x1)
-T39; KappliteLF, 22 wide (x2)
-More to come!

SeisTres
Posts: 2688
Joined: Fri Apr 24, 2009 3:53 am
Location: Dallas, tx

Re: BBE DS48

#9 Post by SeisTres »

Monomer wrote:
BrentEvans wrote:
Monomer wrote: The only downfall is the limited delay and non-graphic eq's. Otherwise, it's a fantastic unit.
You can actually tune with parametric EQ far more precisely than with a graphic. It's just a learning curve.
only 5 bands per output.


lot harder to tweak on the fly.
This is exactly why I decided against the dcx. Everything was going perfectly and almost added it to the cart but once I read it did not have the 31band eq, I took the dbx in a heartbeat.
Built:6 t39, t18, 4 Jack10, 2 autotuba, 2 SLA,2 wedge, 2 TT, 2 Tritrix, curved sla, 2 otop212, 2 SLA pros, Ported 8" sub, 2 ported 210, dual ported 8" sub

Post Reply