My Omnitop 12's (Singles)

[LelandCrooks]

Those used to be the spec horn for DR's. I still have a couple laying around.
I have specs laying around somewhere. I'll see if I can find them.

[Sleazy D]

Are these the asd horn drivers? and what woofer are you using? they look completely profesional, im hoping mine will turn out like this!!!

[Bruce Weldy]

Are these the asd horn drivers? and what woofer are you using? they look completely profesional, im hoping mine will turn out like this!!!

The plans now call for a diffraction horn that you build yourself. If you go that route, use the NSD2005 and the 3012HO or 2512.

[djtecthreat]

Are these the asd horn drivers? and what woofer are you using? they look completely profesional, im hoping mine will turn out like this!!!

Horns are Goldwood 500's, asd drivers.

I decided to use Beta 12A-II's.

And thanks for the compliments! Glad you like them.

[Sleazy D]

What mods(if any) did you make for the goldwood horn?

[djtecthreat]

What mods(if any) did you make for the goldwood horn?

I think I just shaved 1/4" or 1/2" off each end of the horn to make it fit inside the OT12. Not a big deal, and the horn + driver is so light the 2 screws in the middle is more than enough to hold it in place.

[LelandCrooks]

If you want some I have a pair I'll sell cheap.

http://www.goldwoodsound.com/MidHorns.html

GM500pb at the bottom of the page.

[Sleazy D]

I think I might take you up on that Leland, I'll probably pm you regarding that soon.

[Sleazy D]

And techthreat sorry for so many questions but I love these cabs... Haha did you just build the horn mount spec to the piezo array mount?

[djtecthreat]

Missed this one, sorry it took so long to reply.

My horns are mounted with a couple pieces of 1x2" pine board mounted vertically. Nothing special.

[camrynekai]

Thanks Seis!!

I forgot to mention, these are black Duratex spray grade shot from a wagner electric texture gun.

So how did you like that gun?

[djtecthreat]

Its VERY messy but it gets the job DONE and FAST. You'll paint cabs in 3 minutes or less. In retrospect I wish I had rolled them, better control.

[camrynekai]

Its VERY messy but it gets the job DONE and FAST. You'll paint cabs in 3 minutes or less. In retrospect I wish I had rolled them, better control.

So you have rolled Duratex before what size roller did you use? I have the 4" roller and my OCD self just cant get it down that's why I was looking @ that sprayer. Most of my cabs are done in Line-X...but I just added 8 more cabs to my rig and cant swing Line-X pricing this year...was hoping to get close to the same texture using the Duratex

[jswingchun]

...I just added 8 more cabs to my rig and cant swing Line-X pricing this year...was hoping to get close to the same texture using the Duratex

Why not get the cheapo harbor freight texture spray gun? It works well, and I assume you already have an air compressor.

[camrynekai]

Why not get the cheapo harbor freight texture spray gun? It works well, and I assume you already have an air compressor.

The shop where I build @ has a compressor available but not much heat....so the 65 deg. minimum temp is gonna be tough to hit. I remembered those bigger hoppers when I did my popcorn ceiling...cant imagine using one of those bruits to do the Duratex or is there smaller one I'm not seeing?