EAW's new dual 21" sub

Anything not covered elsewhere.
Post Reply
Message
Author
User avatar
Radian
Posts: 2032
Joined: Tue Jul 29, 2008 12:56 pm
Location: Tucson, AZ

Re: EAW's new dual 21" sub

#1 Post by Radian »

Check out similar offerings from Danley:

http://www.danleysoundlabs.com/pdf/TH%2 ... 0Sheet.PDF
No DSP required.
WiSounds wrote:The "Calculated Axial Output Limit", could these numbers be suspect?
They are just that...calculated. The math certainly works on paper, just like we do it here. However, that raw response curve without DSP is a pretty solid indicator of the cabs potential, given it's vented alignment.
Good food, good people, good times.

4 - AT
1 - TT
1 - THT Slim
2 - SLA Pro 4x6 Alphalite

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28916
Joined: Tue May 02, 2006 5:59 pm

Re: EAW's new dual 21" sub

#2 Post by Bill Fitzmaurice »

WiSounds wrote: The "Calculated Axial Output Limit", could these numbers be suspect?
Calculated output = :bull:

And it's got nothing over the T60, except price.
Image

DJ Big Ronn
Posts: 1231
Joined: Sun May 28, 2006 2:43 pm
Location: Carencro, La.

Re: EAW's new dual 21" sub

#3 Post by DJ Big Ronn »

I bet they can be had for the price of a pair of T-48's too. :broke:

djtecthreat
Posts: 638
Joined: Tue Nov 11, 2008 3:21 pm
Location: Worcester, MA

Re: EAW's new dual 21" sub

#4 Post by djtecthreat »

EAW Engineering: "Hey we can't possibly get anymore out of the Eminence 18's we use in all our designs"
Boss: "Ok, well then make them 21's, redesign the same box, mark up the price, and we'll get these things on every rider from here to California!"

I say this... and I own EAW speakers.
DJ TecThreat
-Building-
8 More T48's

-Built-
11 T48 @ 24" 3015LF ( Using 8 )
8 OTop12 - Thread after they were built. & Review, using them w/o subs.
4 SLA Pro's
"Life is one grand, sweet song, so start the music." - R.R.

sine143
Posts: 3066
Joined: Sat Feb 06, 2010 3:27 pm
Location: Raleigh NC

Re: EAW's new dual 21" sub

#5 Post by sine143 »

I will say, Its surprisingly small (given that could also be a bad thing) and at weighs 100 pounds less than I expected to see when I read the title to this thread (200 pounds). Power handling is ridic, but you know... power compression lol. I'f you've got a small venue.... and monies.... it could be the way to go.

But if you have rooms for T60s, choice is obvious.
Built:
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208

2x OT212 (delta pro 450a loaded, eminence psd)

DJ Big Ronn
Posts: 1231
Joined: Sun May 28, 2006 2:43 pm
Location: Carencro, La.

Re: EAW's new dual 21" sub

#6 Post by DJ Big Ronn »

I saw 1499.99, but that doesnt sound right

sine143
Posts: 3066
Joined: Sat Feb 06, 2010 3:27 pm
Location: Raleigh NC

Re: EAW's new dual 21" sub

#7 Post by sine143 »

thats cheaper than the SB1000? a good deal cheaper it seems.
Built:
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208

2x OT212 (delta pro 450a loaded, eminence psd)

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28916
Joined: Tue May 02, 2006 5:59 pm

Re: EAW's new dual 21" sub

#8 Post by Bill Fitzmaurice »

DJ Big Ronn wrote:I saw 1499.99, but that doesnt sound right
That's less than half the SB1000, so not likely. Curiously no price appears for it anywhere.

sine143
Posts: 3066
Joined: Sat Feb 06, 2010 3:27 pm
Location: Raleigh NC

Re: EAW's new dual 21" sub

#9 Post by sine143 »

^

yeah, i mean, even at way off retail the 1000 is like 2600 or more.

waiting for the price :noob:
Built:
2x Tuba 30s delta12lf loaded (gone)
4x Otop12 d2512 loaded
8x t48s (18, 18, 24, 24, 30, 30) 3015lf loaded
2x AT (1 mcm, 1 gto 804)
2x SLA Pro (dayton pa6, 6 goldwood piezo loaded)
1x bastard XF208

2x OT212 (delta pro 450a loaded, eminence psd)

Post Reply