I will probably buy this if become available soon. My local Eminence distributor has this driver listed, but not available yet. (and probably not available soon). Delta 12 lf work ok in reflex box also, so it can be put in box for DJ monitor usage later on.netwerks wrote:If you build T39 @ 22" wide buy the 3012LF driver. Much better, you will get much more sensitivity and much more extension.
Oh, and it's lightweight too.
And as far as money goes, save a few extra bux and get a used EP2500
Will EP-1500 power T39 ?
Re: Will EP-1500 power T39 ?
Omnitop 12 (Kappa12 - melded piezo) - 2
Titan39 (B&C 12BG100) - 1
https://www.facebook.com/djserviskula?fref=ts
Titan39 (B&C 12BG100) - 1
https://www.facebook.com/djserviskula?fref=ts
Re: Will EP-1500 power T39 ?
You can geta T39 kit from leland crooks www.speakerhardware.com he is a member here.lazyman wrote:I will probably buy this if become available soon. My local Eminence distributor has this driver listed, but not available yet. (and probably not available soon). Delta 12 lf work ok in reflex box also, so it can be put in box for DJ monitor usage later on.netwerks wrote:If you build T39 @ 22" wide buy the 3012LF driver. Much better, you will get much more sensitivity and much more extension.
Oh, and it's lightweight too.
And as far as money goes, save a few extra bux and get a used EP2500

Re: Will EP-1500 power T39 ?
I think his location is the limiting factor. LOL, and believe me, if you been on this board for a week, you know who leland isnetwerks wrote:You can geta T39 kit from leland crooks http://www.speakerhardware.com he is a member here.lazyman wrote:I will probably buy this if become available soon. My local Eminence distributor has this driver listed, but not available yet. (and probably not available soon). Delta 12 lf work ok in reflex box also, so it can be put in box for DJ monitor usage later on.netwerks wrote:If you build T39 @ 22" wide buy the 3012LF driver. Much better, you will get much more sensitivity and much more extension.
Oh, and it's lightweight too.
And as far as money goes, save a few extra bux and get a used EP2500

Built:6 t39, t18, 4 Jack10, 2 autotuba, 2 SLA,2 wedge, 2 TT, 2 Tritrix, curved sla, 2 otop212, 2 SLA pros, Ported 8" sub, 2 ported 210, dual ported 8" sub
Re: Will EP-1500 power T39 ?
Location is very limiting factor. I just find out that Eminence NEO-s which local dealer has displayed on site are "just for show-out", and not available for small quantities.
Wish we have some local Leland
. Everything over here is more expensive, if something in US is 100$, this will probably cost at least 100€ .
Wish we have some local Leland

Omnitop 12 (Kappa12 - melded piezo) - 2
Titan39 (B&C 12BG100) - 1
https://www.facebook.com/djserviskula?fref=ts
Titan39 (B&C 12BG100) - 1
https://www.facebook.com/djserviskula?fref=ts
Re: Will EP-1500 power T39 ?
It's not only your country, it's about the same here and all over Europe.lazyman wrote:Location is very limiting factor. I just find out that Eminence NEO-s which local dealer has displayed on site are "just for show-out", and not available for small quantities.
Wish we have some local Leland. Everything over here is more expensive, if something in US is 100$, this will probably cost at least 100€ .
Re: Will EP-1500 power T39 ?
lazyman wrote:Location is very limiting factor. I just find out that Eminence NEO-s which local dealer has displayed on site are "just for show-out", and not available for small quantities.
Wish we have some local Leland. Everything over here is more expensive, if something in US is 100$, this will probably cost at least 100€ .
Didn't notice that..welps better get on EBay!
