Will EP-1500 power T39 ?

Is this amp OK?
Message
Author
User avatar
lazyman
Posts: 182
Joined: Tue Jan 06, 2009 8:37 am
Location: Serbia
Contact:

Re: Will EP-1500 power T39 ?

#16 Post by lazyman »

netwerks wrote:If you build T39 @ 22" wide buy the 3012LF driver. Much better, you will get much more sensitivity and much more extension.

Oh, and it's lightweight too.

And as far as money goes, save a few extra bux and get a used EP2500
I will probably buy this if become available soon. My local Eminence distributor has this driver listed, but not available yet. (and probably not available soon). Delta 12 lf work ok in reflex box also, so it can be put in box for DJ monitor usage later on.
Omnitop 12 (Kappa12 - melded piezo) - 2
Titan39 (B&C 12BG100) - 1

https://www.facebook.com/djserviskula?fref=ts

User avatar
netwerks
Posts: 768
Joined: Fri Nov 20, 2009 4:58 pm
Location: Chicago, Ilinois
Contact:

Re: Will EP-1500 power T39 ?

#17 Post by netwerks »

lazyman wrote:
netwerks wrote:If you build T39 @ 22" wide buy the 3012LF driver. Much better, you will get much more sensitivity and much more extension.

Oh, and it's lightweight too.

And as far as money goes, save a few extra bux and get a used EP2500
I will probably buy this if become available soon. My local Eminence distributor has this driver listed, but not available yet. (and probably not available soon). Delta 12 lf work ok in reflex box also, so it can be put in box for DJ monitor usage later on.
You can geta T39 kit from leland crooks www.speakerhardware.com he is a member here. ;)

SeisTres
Posts: 2688
Joined: Fri Apr 24, 2009 3:53 am
Location: Dallas, tx

Re: Will EP-1500 power T39 ?

#18 Post by SeisTres »

netwerks wrote:
lazyman wrote:
netwerks wrote:If you build T39 @ 22" wide buy the 3012LF driver. Much better, you will get much more sensitivity and much more extension.

Oh, and it's lightweight too.

And as far as money goes, save a few extra bux and get a used EP2500
I will probably buy this if become available soon. My local Eminence distributor has this driver listed, but not available yet. (and probably not available soon). Delta 12 lf work ok in reflex box also, so it can be put in box for DJ monitor usage later on.
You can geta T39 kit from leland crooks http://www.speakerhardware.com he is a member here. ;)
I think his location is the limiting factor. LOL, and believe me, if you been on this board for a week, you know who leland is ;)
Built:6 t39, t18, 4 Jack10, 2 autotuba, 2 SLA,2 wedge, 2 TT, 2 Tritrix, curved sla, 2 otop212, 2 SLA pros, Ported 8" sub, 2 ported 210, dual ported 8" sub

User avatar
lazyman
Posts: 182
Joined: Tue Jan 06, 2009 8:37 am
Location: Serbia
Contact:

Re: Will EP-1500 power T39 ?

#19 Post by lazyman »

Location is very limiting factor. I just find out that Eminence NEO-s which local dealer has displayed on site are "just for show-out", and not available for small quantities.

Wish we have some local Leland :) . Everything over here is more expensive, if something in US is 100$, this will probably cost at least 100€ .
Omnitop 12 (Kappa12 - melded piezo) - 2
Titan39 (B&C 12BG100) - 1

https://www.facebook.com/djserviskula?fref=ts

User avatar
AntonZ
Posts: 2687
Joined: Sun May 14, 2006 6:00 am
Location: NL

Re: Will EP-1500 power T39 ?

#20 Post by AntonZ »

lazyman wrote:Location is very limiting factor. I just find out that Eminence NEO-s which local dealer has displayed on site are "just for show-out", and not available for small quantities.

Wish we have some local Leland :) . Everything over here is more expensive, if something in US is 100$, this will probably cost at least 100€ .
It's not only your country, it's about the same here and all over Europe.

User avatar
netwerks
Posts: 768
Joined: Fri Nov 20, 2009 4:58 pm
Location: Chicago, Ilinois
Contact:

Re: Will EP-1500 power T39 ?

#21 Post by netwerks »

lazyman wrote:Location is very limiting factor. I just find out that Eminence NEO-s which local dealer has displayed on site are "just for show-out", and not available for small quantities.

Wish we have some local Leland :) . Everything over here is more expensive, if something in US is 100$, this will probably cost at least 100€ .

Didn't notice that..welps better get on EBay! :)

Post Reply