Page 1 of 1
Table Tuba compability
Posted: Thu Feb 12, 2026 2:08 am
by cbarth
Hi,
Sorry if this has been asked before, but Iwas wondering if the new Faital 10RS430 would work in a wide Table Tuba? VAS is a bit high
FS: 32HZ
QTS: 0,28
VAS: 59,2L
https://faitalpro.com/en/products/LF_Lo ... =151040095
Re: Table Tuba compability
Posted: Thu Feb 12, 2026 7:50 am
by Bill Fitzmaurice
It should work just fine. Vas is the least critical spec. But it's mighty pricey. I can see its value in a pro-sound T24 or T39, but for home theater it's overkill.
Re: Table Tuba compability
Posted: Thu Feb 12, 2026 5:43 pm
by cbarth
Good to know, thanks for the reply! It's quite expensive but here in europe we can get it cheaper than a Dayton Reference 10 inch subwoofer. And with front mounted gasket and superiour build quality it brings some peace of mind
Re: Table Tuba compability
Posted: Thu Feb 12, 2026 5:54 pm
by Bill Fitzmaurice
Sure, since you have to import Dayton, but there must be other options at a sensible cost. For instance:
https://lavocespeakers.com/product/ssf102-50l/