Is it possible to build a titan 48 for a 18inch driver
Posted: Sat Sep 06, 2025 9:50 pm
Can a titan be made to fit a 18 inch driver
Hi, and welcome.
Here is a link to answer that question. viewtopic.php?t=1130
BillFitzmaurice.info
Loudspeaker Design
https://billfitzmaurice.info/forum/
Is it possible to build a titan 48 for a 18inch driver
Page 1 of 1
Re: Is it possible to build a titan 48 for a 18inch driver
Posted: Sat Sep 06, 2025 10:08 pm
Re: Is it possible to build a titan 48 for a 18inch driver
Posted: Sat Sep 06, 2025 10:19 pm
Thank you Tom much appreciated
Re: Is it possible to build a titan 48 for a 18inch driver
Posted: Sun Sep 07, 2025 12:30 am
It has been done though. I'm brain farting on who did it. It was within the past few years. Ahhh! Crap. Think think think. Grrr. Come on! Brain no workie. It'll come to me.
Not recommended at all. But in the world of anything's possible, nothing's impossible. And it's DIY, so do what you want. But if you want great results, follow the plans. I know from experience that there's a strong pull to one up and make better that which is already the best... but it's a waste of thought. Follow the plans and get better results with a 12 than you'd otherwise get with a ported 18.
Not recommended at all. But in the world of anything's possible, nothing's impossible. And it's DIY, so do what you want. But if you want great results, follow the plans. I know from experience that there's a strong pull to one up and make better that which is already the best... but it's a waste of thought. Follow the plans and get better results with a 12 than you'd otherwise get with a ported 18.
Re: Is it possible to build a titan 48 for a 18inch driver
Posted: Sun Sep 07, 2025 11:47 pm
HowieZ... Thats who made his with 18's
Re: Is it possible to build a titan 48 for a 18inch driver
Posted: Mon Sep 08, 2025 6:11 am
"Aerodynamics are for those who don't know how to build engines."- Enzo Ferrari
"Eighteens are for those who don't know how to build horns."- Bill Fitzmaurice
"Eighteens are for those who don't know how to build horns."- Bill Fitzmaurice
Re: Is it possible to build a titan 48 for a 18inch driver
Posted: Mon Sep 08, 2025 10:31 pm
Bill Fitzmaurice wrote: ↑Mon Sep 08, 2025 6:11 am "Aerodynamics are for those who don't know how to build engines."- Enzo Ferrari
"Eighteens are for those who don't know how to build horns."- Bill Fitzmaurice
