Page 1 of 1
Throat Sheath Brace Size
Posted: Tue Mar 07, 2023 9:14 pm
by fender3x
I realized that I have two circles with a 5 1/8" radius left over after cutting out my woofer spacers. The throat sheath braces are to be cut from a 5" radius circles. Is 5 1/8" close enough, or should I trim them?
Re: Throat Sheath Brace Size
Posted: Tue Mar 07, 2023 9:51 pm
by Bill Fitzmaurice
Close enough, but the length and height will have to be adjusted to fit.
Re: Throat Sheath Brace Size
Posted: Wed Mar 08, 2023 7:00 pm
by fender3x
Great! Thanks, Bill!
Re: Throat Sheath Brace Size
Posted: Thu Mar 09, 2023 12:36 pm
by fender3x
In an abundance of caution, I made a paper sheath brace using a 5" radius and a 5.125" radius. You can see that the 5.125 radius is slightly flatter...but at it's most profound, the difference is about 1/32". I generally think I am doing well when my errors are in this range
