Since I posted elsewhere figured I should give some background too....
I was kicking around here a few years ago on an account I can't remember, and built a pair each of Omni 10s and T18s that I absolutely love. Unfortunately I've since discovered I have no real talent or inclination to be a DJ, and since graduating university my opportunities to help other people do so have largely dried up. So from now on I'll be here mostly in a home theatre capacity.
In terms of background, I'm an engineer by trade and training (mostly mech and ECE, bit of SW and medical mixed in for good measure). I have a decent amount of carpentry experience, and I'm looking to dabble a bit more heavily in the world of DIY audio electronics as well.
So hello all (again), and hopefully I'll actually stick around a bit longer this time.
Luke
Greetings (again) from Ontario
-
- Posts: 6912
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: Greetings (again) from Ontario
Hi Lawbecke
G'day and welcome (back) to the forum
G'day and welcome (back) to the forum

Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
Re: Greetings (again) from Ontario
Welcome, fellow Ontarian!