BillFitzmaurice.info

Had anyone come up with a chart for time alignment for the Tubas and Titans?
I know that there are a lot of variables, but I'm looking for what the bass line should be. ( ha get it, bass, base ya ok)
Anyway it would be nice to say if you have a T24 you need to set in X ms of delay as a starting point.

So if my dr's are in roughly the same plane as my T24's, how much delay should i dial in on the dr's?

J_Dunavin wrote:So if my dr's are in roughly the same plane as my T24's, how much delay should i dial in on the dr's?

0. None. Nada. Ziltch.

J_Dunavin wrote:So if my dr's are in roughly the same plane as my T24's, how much delay should i dial in on the dr's?

Doing some quick math on the plans, it looks like the horn path is around 8 feet. So, you can add 7-9ms if you want. Doubt that you'll actually hear any difference.


Now, delaying the subs and the mains to match up with the backline will be much more noticeable.

Bruce Weldy wrote: Doing some quick math on the plans, it looks like the horn path is around 8 feet.

From which you have to deduct the DR path length. The result is inaudible.

Well dang
For whatever reason i thought that you were supposed to add some in there. Out it comes next gig!

DJPhatman wrote:

J_Dunavin wrote:So if my dr's are in roughly the same plane as my T24's, how much delay should i dial in on the dr's?

0. None. Nada. Ziltch.