Hey,
I'm considering getting the Behringer DEQ2496 along with the Ultradrive. Would I still have any use for my BBE? I figured I could maybe sell it along with my Samson crossover.
Thanks!
Donny
Do I Need My BBE?
Do I Need My BBE?
Donny Collins
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
- Zack Brock
- Posts: 1124
- Joined: Sun Oct 07, 2007 1:06 am
- Location: Northeast Florida
- Contact:
Re: Do I Need My BBE?
I would vote No, you don't need it. IMHO, of course.
In my testing, a BBE processor is a combination exciter (artificial harmonics/distortion added to sound) and simple smiley-face EQ (sucked mids) adjustable by the Low Contour and Process (highs) knobs. After extensive testing of the settings and turning it on and off, I obtained better results without it. The sound was always fatiguing to me with it on. With the additional revealing detail of piezos in my PA, it was obvious that it was no longer needed to artificially add 'clarity' to my sound.
In my testing, a BBE processor is a combination exciter (artificial harmonics/distortion added to sound) and simple smiley-face EQ (sucked mids) adjustable by the Low Contour and Process (highs) knobs. After extensive testing of the settings and turning it on and off, I obtained better results without it. The sound was always fatiguing to me with it on. With the additional revealing detail of piezos in my PA, it was obvious that it was no longer needed to artificially add 'clarity' to my sound.
Zack Brock
Authorized Builder, Northeast Florida (Greater Jacksonville Area)
WavePulse Acoustics | zackbrock@macpulse.com | http://www.bestbasscabs.com/
Authorized Builder, Northeast Florida (Greater Jacksonville Area)
WavePulse Acoustics | zackbrock@macpulse.com | http://www.bestbasscabs.com/
- Bill Fitzmaurice
- Site Admin
- Posts: 28916
- Joined: Tue May 02, 2006 5:59 pm
Re: Do I Need My BBE?
+1. BBE can make poor speakers sound better, but it will only make good speakers worse.Zack Brock wrote: With the additional revealing detail of piezos in my PA, it was obvious that it was no longer needed to artificially add 'clarity' to my sound.
Re: Do I Need My BBE?
hey guys i just got the drpa+ and it made my system sound fantastic but when i put my bbe sonic maximizer on it sounded even better. mind u i not a sound guy by any means and dont know much how to use limiter compressor ect in my drpa. but adding bbe sonic maximizer my ear fell in love with the sound. just my 2 cents
2 T24's
4 sl36
4 jbl eons
2 QSC K12
2 Crown macroteck 2400
1 crown xls900
1 drpa+ just added
denon 3700
denonmixer
serato sl
bbe sonic maximizer
4 sl36
4 jbl eons
2 QSC K12
2 Crown macroteck 2400
1 crown xls900
1 drpa+ just added
denon 3700
denonmixer
serato sl
bbe sonic maximizer
Re: Do I Need My BBE?
Well I bit the bullet today and bought a ULTRADRIVE PRO DCX2496...so it will probably be here by Thursday. I'll probably do my best to get ready to gig with it...at least set the limiter for the sub...sure hope I like it.
Donny Collins
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW
Built:
Two 18" Tuba 30's 3012 LF
Two 26" Tuba 30's Lab 12
Two OmniTop 12's DL 2512 (Melded Array)
Presonus Studio One DAW
Harrison Consoles MixBus 32C DAW