Getting Cold in Minnesota Need to finish builds Quickly

Message
Author
45psidrummer
Posts: 15
Joined: Sun Sep 26, 2010 8:20 pm
Location: Minneapolis, MN

Re: Getting Cold in Minnesota Need to finish builds Quickly

#31 Post by 45psidrummer »

Bruce, you stink for making comments like that. i should be golfing also.

g-slab, have not started on the tops, too much travel for work. i have not been home all of January. I did donate a pair of Jack 10's and a pair of TUba 24 to a new church in our community. Just tuned the system for them. It sounds awesome. if you make your way out to Cokato, MN you can hear them in the Crossroads Church.

Bruce Weldy
Posts: 8538
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Getting Cold in Minnesota Need to finish builds Quickly

#32 Post by Bruce Weldy »

45psidrummer wrote:Bruce, you stink for making comments like that. i should be golfing also.
:loler:

Played yesterday and today in shorts...... :clap:

Of course, I've got an outside gig on Saturday and we're expecting rain...I guess that's my payback. :confused:

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

User avatar
Dave Non-Zero
Posts: 1939
Joined: Thu Jul 13, 2006 4:59 am
Location: Dundee, Scotland
Contact:

Re: Getting Cold in Minnesota Need to finish builds Quickly

#33 Post by Dave Non-Zero »

I'm in Scotland, we always expect rain. :(
-1 for thought terminating cliches.

Built and/or own:
8 x T48 24" 3015LF
6 x DR280
2 x DR250 old style beta10
2 x T36s 20" delta15L
1 x TAT
1 x dual Lab12 30" T60

In Progress:
2 x DR280

User avatar
Harley
Posts: 5758
Joined: Mon May 08, 2006 2:45 pm
Location: Christchurch, New Zealand - Authorised BFM Cab Builder

Re: Getting Cold in Minnesota Need to finish builds Quickly

#34 Post by Harley »

Dave Non-Zero wrote:I'm in Scotland, we always expect rain. :(
Yep, the weather forecasting there is simple;

If it's clear outside, it's about to rain - If it's not, it's already raining :mrgreen:
ImageSemi-retired: Former Australia and New Zealand Authorised BFM cab builder.

User avatar
Dave Non-Zero
Posts: 1939
Joined: Thu Jul 13, 2006 4:59 am
Location: Dundee, Scotland
Contact:

Re: Getting Cold in Minnesota Need to finish builds Quickly

#35 Post by Dave Non-Zero »

So true. :)
-1 for thought terminating cliches.

Built and/or own:
8 x T48 24" 3015LF
6 x DR280
2 x DR250 old style beta10
2 x T36s 20" delta15L
1 x TAT
1 x dual Lab12 30" T60

In Progress:
2 x DR280

BoostFab
Posts: 458
Joined: Fri Sep 17, 2010 2:51 pm
Location: DFW, TX

Re: Getting Cold in Minnesota Need to finish builds Quickly

#36 Post by BoostFab »

the snow&ice storm here in north texas is the worst at least more than 10 years... hopefully it clears up before the super bowl

Bruce Weldy
Posts: 8538
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Getting Cold in Minnesota Need to finish builds Quickly

#37 Post by Bruce Weldy »

BoostFab wrote:the snow&ice storm here in north texas is the worst at least more than 10 years... hopefully it clears up before the super bowl
We even had some snow on the ground this morning too and we're pretty far south. Just drove home from a gig and it's 23 out there. Dang near had to put on a coat.

Dumbass story of the day....

Rung out the system with the DriveRack - everything was fine. After the first break, the drummer hit the A/C plug....power went down for a split second.....guess who had forgotten to save the settings......????????

Fortunately the previous setting was ok.....we played the rest of the night with it and they asked us to come back next week.

Funny part is that I wall-loaded the T39s.....They asked us to turn it down - stuff was shaking in the kitchen...they said they haven't ever heard anything like that before.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

User avatar
Dave Non-Zero
Posts: 1939
Joined: Thu Jul 13, 2006 4:59 am
Location: Dundee, Scotland
Contact:

Re: Getting Cold in Minnesota Need to finish builds Quickly

#38 Post by Dave Non-Zero »

one advantage of the DCX DEQ. they switch on again with the last settings.
-1 for thought terminating cliches.

Built and/or own:
8 x T48 24" 3015LF
6 x DR280
2 x DR250 old style beta10
2 x T36s 20" delta15L
1 x TAT
1 x dual Lab12 30" T60

In Progress:
2 x DR280

BoostFab
Posts: 458
Joined: Fri Sep 17, 2010 2:51 pm
Location: DFW, TX

Re: Getting Cold in Minnesota Need to finish builds Quickly

#39 Post by BoostFab »

Bruce Weldy wrote:..they said they haven't ever heard anything like that before.
that was the best part :loler:

45psidrummer
Posts: 15
Joined: Sun Sep 26, 2010 8:20 pm
Location: Minneapolis, MN

Re: Getting Cold in Minnesota Need to finish builds Quickly

#40 Post by 45psidrummer »

Well, got my first complaint about the system in the Church (2 Jack 110, and 2 Tuba24's). they said that ..."the Older people do not understand why they have to have all that "boom boom boom" going." The worship band, and sound tech could not be happier. I guess that would be a compliment?

Who would have thought i would get a complaint like that? I get it every time im behind a sound board, and I can almost pick out who is going to complain first. Usually i am doing corporate events, and for some reason they put the most expensive, VIP, or the older peoples table right in front of the SUB stack. It only takes a couple of minutes before they come back and yell. Evan when i do not have anything in the Mix except kick and vocals. You all have been there!

It is a tropical paradise today in MN i think the temp was 37 degrees today. So to Bruce, i swung my first golf clubs in the Garage today, while waiting to get some supplies. I will be out there in no time (3 months) haha.

Bruce Weldy
Posts: 8538
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Getting Cold in Minnesota Need to finish builds Quickly

#41 Post by Bruce Weldy »

45psidrummer wrote: So to Bruce, i swung my first golf clubs in the Garage today, while waiting to get some supplies. I will be out there in no time (3 months) haha.
Just got in from walking 18 holes in shorts....mid 70s today. However, in the summer I'd rather be where you are.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

User avatar
Dave Non-Zero
Posts: 1939
Joined: Thu Jul 13, 2006 4:59 am
Location: Dundee, Scotland
Contact:

Re: Getting Cold in Minnesota Need to finish builds Quickly

#42 Post by Dave Non-Zero »

45psidrummer wrote: It only takes a couple of minutes before they come back and yell. Evan when i do not have anything in the Mix except kick and vocals. You all have been there!
Hell yeah. I had a bride crying once. and that was with just vocals and me telling the band to play softer, and softer. i had all the channels off. nothing i could do, but it was me getting the grief.

Just got in from walking 18 holes in shorts....mid 70s today. However, in the summer I'd rather be where you are.
My dad was out the door at 8 this morning to play golf. in the foggy drizzley dark, with snow patches still on the ground. He is hoping he can get the full 18 holes if the course isnt partially flooded. haha.

funny how we are never happy where we are, grass is always greener... :D
-1 for thought terminating cliches.

Built and/or own:
8 x T48 24" 3015LF
6 x DR280
2 x DR250 old style beta10
2 x T36s 20" delta15L
1 x TAT
1 x dual Lab12 30" T60

In Progress:
2 x DR280

SeisTres
Posts: 2688
Joined: Fri Apr 24, 2009 3:53 am
Location: Dallas, tx

Re: Getting Cold in Minnesota Need to finish builds Quickly

#43 Post by SeisTres »

Dave Non-Zero wrote:
45psidrummer wrote: It only takes a couple of minutes before they come back and yell. Evan when i do not have anything in the Mix except kick and vocals. You all have been there!
Hell yeah. I had a bride crying once. and that was with just vocals and me telling the band to play softer, and softer. i had all the channels off. nothing i could do, but it was me getting the grief.
I like how they blame that it is too loud if the wedding is not turning out as expected :(
Built:6 t39, t18, 4 Jack10, 2 autotuba, 2 SLA,2 wedge, 2 TT, 2 Tritrix, curved sla, 2 otop212, 2 SLA pros, Ported 8" sub, 2 ported 210, dual ported 8" sub

CafSentryGnome
Posts: 258
Joined: Tue Sep 15, 2009 10:03 am
Location: South Australia

Re: Getting Cold in Minnesota Need to finish builds Quickly

#44 Post by CafSentryGnome »

SeisTres wrote:
Dave Non-Zero wrote:
45psidrummer wrote: It only takes a couple of minutes before they come back and yell. Evan when i do not have anything in the Mix except kick and vocals. You all have been there!
Hell yeah. I had a bride crying once. and that was with just vocals and me telling the band to play softer, and softer. i had all the channels off. nothing i could do, but it was me getting the grief.
I like how they blame that it is too loud if the wedding is not turning out as expected :(
*wedding party gets run over by the limo*

'dude i told you to turn it down, look what you done'

Post Reply