China telephone number. Interesting site. Have you used them before?Grant Bunter wrote: ↑Mon Oct 02, 2023 9:53 pm https://www.greatguitareshop.com/sell-5 ... hragm.html
Finally! Omni 12 Tall Boy build
Re: Finally! Omni 12 Tall Boy build
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
-
Grant Bunter
- Posts: 6912
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: Finally! Omni 12 Tall Boy build
No.Seth wrote: ↑Mon Oct 02, 2023 10:04 pmChina telephone number. Interesting site. Have you used them before?Grant Bunter wrote: ↑Mon Oct 02, 2023 9:53 pm https://www.greatguitareshop.com/sell-5 ... hragm.html
I just saw the .com...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
-
CarterKraft
- Posts: 263
- Joined: Thu Oct 22, 2020 1:46 pm
- Location: DFW
Re: Finally! Omni 12 Tall Boy build
I couldn't determine how to buy from that site in a manner that I usually use (protection) but I will keep looking.
I'll likely just buy a whole new tweeter.
I am going to attempt to tune this new tweeter to my liking, just more education really.
I'll likely just buy a whole new tweeter.
I am going to attempt to tune this new tweeter to my liking, just more education really.
Weldon Carter
-
CarterKraft
- Posts: 263
- Joined: Thu Oct 22, 2020 1:46 pm
- Location: DFW
Re: Finally! Omni 12 Tall Boy build
Also as this tweeter us pretty old given the thread situation so we think the new version will be fine going forward on music if I don't do dumb stunts?
The ASD has 5 more watts power handling but I don't really think I was pushing on this tweeter very hard.
I had it pulled back 12db from the mid/woofer to get the gains set.
Obviously (now) a full power sweep was dumb.
The ASD has 5 more watts power handling but I don't really think I was pushing on this tweeter very hard.
I had it pulled back 12db from the mid/woofer to get the gains set.
Obviously (now) a full power sweep was dumb.
Weldon Carter
-
Bruce Weldy
- Posts: 8538
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: Finally! Omni 12 Tall Boy build
Fellas, Eminence no longer manufactures replacement diaphragms for those tweeters. There may be some still in stock out there or there are some knock-offs. But, I'd just buy a replacement driver - they aren't that expensive.
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
-
CarterKraft
- Posts: 263
- Joined: Thu Oct 22, 2020 1:46 pm
- Location: DFW
-
CarterKraft
- Posts: 263
- Joined: Thu Oct 22, 2020 1:46 pm
- Location: DFW
Re: Finally! Omni 12 Tall Boy build
I lied, this neo driver is plenty loud.
The DSP "tune" that was in it was a test tune when I was troubleshooting, I loaded a old tune and it's back!
Really glad I didn't have to set fire to this deal
Ill retune this when I have time, I need to get the Jack 12 Lite going and accompanying portable sub.
The DSP "tune" that was in it was a test tune when I was troubleshooting, I loaded a old tune and it's back!
Really glad I didn't have to set fire to this deal
Ill retune this when I have time, I need to get the Jack 12 Lite going and accompanying portable sub.
Weldon Carter
Re: Finally! Omni 12 Tall Boy build
Just keep in mind, the RMS limit of the new NEO tweet is half that of the one that fried. Might want to keep a spare handy, put a DSP limiter module in the signal path and limit voltage to the tweeter to roughly 12 volts, or both.CarterKraft wrote: ↑Fri Oct 06, 2023 6:28 pm I lied, this neo driver is plenty loud.
The DSP "tune" that was in it was a test tune when I was troubleshooting, I loaded a old tune and it's back!
Really glad I didn't have to set fire to this deal
Ill retune this when I have time, I need to get the Jack 12 Lite going and accompanying portable sub.
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421
-
CarterKraft
- Posts: 263
- Joined: Thu Oct 22, 2020 1:46 pm
- Location: DFW
Re: Finally! Omni 12 Tall Boy build
Great point.
I did some research into how to create the voltage limiters in the SigmaStudio in the past but it goes over my head pretty quick unfortunately.
I did some research into how to create the voltage limiters in the SigmaStudio in the past but it goes over my head pretty quick unfortunately.
Weldon Carter