ringing out

Helpful hints on how to build 'em, and where to get the stuff you need.
Message
Author
User avatar
Seth
Posts: 3131
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: ringing out

#16 Post by Seth »

I'm happy to hear it was a successful event for you. It just wouldn't be right if everything went off without a hitch here and there. Good job diagnosing and overcoming the faulty connection.

What width and driver combo is the T48?
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Rich4349
Posts: 899
Joined: Wed Jul 30, 2008 10:18 am
Location: Kankakee, IL

Re: ringing out

#17 Post by Rich4349 »

Thanks. I shouldn't have relied on my faulty memory, but checked it out much longer in advance, in case I needed to order a new driver. I got lucky.

24", 3015LF. It fits in my Toyota Matrix's hatchback with room to spare, AND close the hatch. A T-60 is about 4" too long to do so, even with the seat slammed all the way forward.
2 DR250s, 2 27" Lab15 T-60s, 2 30" Neo Titan 39s, 1 Autotuba...and looking for more!

Post Reply