ringing out

Helpful hints on how to build 'em, and where to get the stuff you need.
Message
Author
User avatar
Seth
Posts: 3007
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: ringing out

#16 Post by Seth »

I'm happy to hear it was a successful event for you. It just wouldn't be right if everything went off without a hitch here and there. Good job diagnosing and overcoming the faulty connection.

What width and driver combo is the T48?
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Rich4349
Posts: 880
Joined: Wed Jul 30, 2008 10:18 am
Location: Kankakee, IL

Re: ringing out

#17 Post by Rich4349 »

Thanks. I shouldn't have relied on my faulty memory, but checked it out much longer in advance, in case I needed to order a new driver. I got lucky.

24", 3015LF. It fits in my Toyota Matrix's hatchback with room to spare, AND close the hatch. A T-60 is about 4" too long to do so, even with the seat slammed all the way forward.
2 DR250s, 2 27" Lab15 T-60s, 2 30" Neo Titan 39s, 1 Autotuba...and looking for more!

Post Reply