need a new router
need a new router
any suggestions on a router for occasional use, nothing commercial. I would especially like one that has an easy collet. Don't want to spend any more than is necessary. I also don't really need one that will take 1/2" bits, 1/4" should do fine. This is not a "wanted" ad, I'm looking to buy new.
-
Harley
- Posts: 5758
- Joined: Mon May 08, 2006 2:45 pm
- Location: Christchurch, New Zealand - Authorised BFM Cab Builder
Re: need a new router
Ryobi ERT241200...I have 3 of them.
Cost $NZ107 which is about $US 70.00
Cost $NZ107 which is about $US 70.00
Semi-retired: Former Australia and New Zealand Authorised BFM cab builder.-
David Carter
- Posts: 1824
- Joined: Mon Jan 01, 2007 7:20 am
- Location: (East) Tennessee, USA
Re: need a new router
This is the one I bought earlier this year, and I've been very happy with it.
Dave
Built:
- Omni 10 (S2010 + piezo array)
- 2 x DR250 (DL II 2510 + melded array)
- 2 x Titan 39 (BP102 - 14"W)
- 2 x Titan 39 (3012LF - 20"W)
- 4 x DR200 (Delta Pro 8B + melded array)
Built:
- Omni 10 (S2010 + piezo array)
- 2 x DR250 (DL II 2510 + melded array)
- 2 x Titan 39 (BP102 - 14"W)
- 2 x Titan 39 (3012LF - 20"W)
- 4 x DR200 (Delta Pro 8B + melded array)
-
Harley
- Posts: 5758
- Joined: Mon May 08, 2006 2:45 pm
- Location: Christchurch, New Zealand - Authorised BFM Cab Builder
Re: need a new router
You lucky dogs you having Sears in the USA...David Carter wrote:This is the one I bought earlier this year, and I've been very happy with it.
Semi-retired: Former Australia and New Zealand Authorised BFM cab builder.