Any Interest in a Rig That Includes 4xDR200 and 2xT39?

For member use only, no commercial ads allowed.
Message
Author
User avatar
David Carter
Posts: 1833
Joined: Mon Jan 01, 2007 7:20 am
Location: (East) Tennessee, USA

Any Interest in a Rig That Includes 4xDR200 and 2xT39?

#1 Post by David Carter »

Hey everyone! It's been several years since I've checked in here. Life has been busy and taken me down lots of roads that did not include speaker building. I first joined the community back around 2004-ish if memory serves. I built, used, and later sold an Omni10, a pair of DR250s, and a pair of slim T39s. I eventually settled on 4xDR200 and 2xT39 (20" wide) as my PA rig for a band I was trying to get off the ground. Although the photos have long since disappeared, my build threads for everything I built are still here in the forums. I probably still have some of the photos stored on a computer somewhere if anyone is interested.

As fate would have it, I'm getting out of the music scene for good this time, and I'm looking to see if anyone is interested in all or part of my current rig. I'm in the Tri-Cities area in NE Tennessee, and I'd prefer not to ship (although I did ship some T39s once to a guy who was willing to pay the shipping).The rig currently consists of the following:

  • 4x DR200 tops (16-ohm drivers so all four can be run off one side of a stereo amp of you're running a mono rig)
  • SOLD - 2x T39 20" wide subs with 3012LF drivers
  • SOLD - QSC PLX1804 amp (2 x 800W @ 4 ohms, 2 x 550W @ 8 ohms, weighs only 13 lbs.)
  • SOLD - Driverack 260 Loudspeaker Management System
  • Soundcraft UI24R Digital Mixer
  • 2x tripod speaker stands
  • a boatload of cables to connect it all
I have owned all of this gear for a number of years, but it was never really used as much as I hoped it would be. In fact, I can probably count on both hands the number of times it has left my house in 10 years, and it's not been used much more than that at my house for rehearsals. I can also probably count on one hand the number of times the volume has been turned up past 6-7 on the power amp. So while it is technically "old," it's like a car that's 10-15 old but only has a thousand miles on the odometer. :)

If anyone happens to be interested in the whole rig, let's talk. Otherwise, I can come up with pricing for all the gear except the speakers. I really have no idea what fair pricing is nowadays for those. I can't even remember what I got for the ones I sold back in the day. So if you're interested in any of the speakers, make an offer, and we'll discuss.

floor%20stacked%20front.jpg
T39%20-%20finished.jpg
T39%20-%20finished.jpg (62.24 KiB) Viewed 143 times
Last edited by David Carter on Fri Jul 04, 2025 1:50 am, edited 1 time in total.
Dave

Built:
- Omni 10 (S2010 + piezo array)
- 2 x DR250 (DL II 2510 + melded array)
- 2 x Titan 39 (BP102 - 14"W)
- 2 x Titan 39 (3012LF - 20"W)
- 4 x DR200 (Delta Pro 8B + melded array)

Bruce Weldy
Posts: 8546
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Any Interest in a Rig That Includes 4xDR200 and 2xT39?

#2 Post by Bruce Weldy »

Great to see you post again. How do you leave the music business? I'm pretty sure I'm in for life whether I like it or not..... :mrgreen:

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

User avatar
David Carter
Posts: 1833
Joined: Mon Jan 01, 2007 7:20 am
Location: (East) Tennessee, USA

Re: Any Interest in a Rig That Includes 4xDR200 and 2xT39?

#3 Post by David Carter »

Bruce Weldy wrote: Fri Jun 27, 2025 8:57 am Great to see you post again. How do you leave the music business? I'm pretty sure I'm in for life whether I like it or not..... :mrgreen:
Good to see a familiar name pop up again! Hope you’re doing well! I think it would be fair to say that I’m leaving it, but it’s not leaving me. For me, it’s always been a hobby not a money-making venture, and life’s gotten too busy between family, work, and church. It’s amazing how having grandkids living close can quickly take over your life (in a good way)!

So, I’ve not lost my love for music. I’ve just lost my love for a basement full of gear that gathers dust and never gets used. I’d like someone else who will actually use it to have it.
Dave

Built:
- Omni 10 (S2010 + piezo array)
- 2 x DR250 (DL II 2510 + melded array)
- 2 x Titan 39 (BP102 - 14"W)
- 2 x Titan 39 (3012LF - 20"W)
- 4 x DR200 (Delta Pro 8B + melded array)

Bruce Weldy
Posts: 8546
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Any Interest in a Rig That Includes 4xDR200 and 2xT39?

#4 Post by Bruce Weldy »

David Carter wrote: Sat Jun 28, 2025 8:23 am
Bruce Weldy wrote: Fri Jun 27, 2025 8:57 am Great to see you post again. How do you leave the music business? I'm pretty sure I'm in for life whether I like it or not..... :mrgreen:
Good to see a familiar name pop up again! Hope you’re doing well! I think it would be fair to say that I’m leaving it, but it’s not leaving me. For me, it’s always been a hobby not a money-making venture, and life’s gotten too busy between family, work, and church. It’s amazing how having grandkids living close can quickly take over your life (in a good way)!

So, I’ve not lost my love for music. I’ve just lost my love for a basement full of gear that gathers dust and never gets used. I’d like someone else who will actually use it to have it.
I've always been a weekend warrior, but I just can't seem to unload the garage full of stuff I've accumulated....(that doesn't count the real PA in the trailer). Thank goodness I don't have a basement to fill up too....

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

User avatar
Tom Smit
Posts: 7576
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Any Interest in a Rig That Includes 4xDR200 and 2xT39?

#5 Post by Tom Smit »

Good to see you again Dave!
TomS

Joman116
Posts: 9
Joined: Sat Jun 21, 2025 4:40 pm
Location: Dallas, TX

Re: Any Interest in a Rig That Includes 4xDR200 and 2xT39?

#6 Post by Joman116 »

Hi David
I am definitely interested particularly in the T39's (and amp and driverack if it pairs well). I am in TX, however. Would need to look into shipping. I am doing that right now. I will send you a PM!

User avatar
David Carter
Posts: 1833
Joined: Mon Jan 01, 2007 7:20 am
Location: (East) Tennessee, USA

Re: Any Interest in a Rig That Includes 4xDR200 and 2xT39?

#7 Post by David Carter »

Tom Smit wrote: Sat Jun 28, 2025 10:29 pm Good to see you again Dave!
Good to back even if it's just for a short visit. :) Hope you're doing well!
Dave

Built:
- Omni 10 (S2010 + piezo array)
- 2 x DR250 (DL II 2510 + melded array)
- 2 x Titan 39 (BP102 - 14"W)
- 2 x Titan 39 (3012LF - 20"W)
- 4 x DR200 (Delta Pro 8B + melded array)

User avatar
David Carter
Posts: 1833
Joined: Mon Jan 01, 2007 7:20 am
Location: (East) Tennessee, USA

Re: Any Interest in a Rig That Includes 4xDR200 and 2xT39?

#8 Post by David Carter »

Joman116 wrote: Tue Jul 01, 2025 8:16 am Hi David
I am definitely interested particularly in the T39's (and amp and driverack if it pairs well). I am in TX, however. Would need to look into shipping. I am doing that right now. I will send you a PM!
Just saw your PM and replied. Thanks!
Dave

Built:
- Omni 10 (S2010 + piezo array)
- 2 x DR250 (DL II 2510 + melded array)
- 2 x Titan 39 (BP102 - 14"W)
- 2 x Titan 39 (3012LF - 20"W)
- 4 x DR200 (Delta Pro 8B + melded array)

User avatar
David Carter
Posts: 1833
Joined: Mon Jan 01, 2007 7:20 am
Location: (East) Tennessee, USA

Re: Any Interest in a Rig That Includes 4xDR200 and 2xT39?

#9 Post by David Carter »

SOLD the T39s, QSC amp, and Driverack 260.
Last edited by David Carter on Fri Jul 04, 2025 1:48 am, edited 1 time in total.
Dave

Built:
- Omni 10 (S2010 + piezo array)
- 2 x DR250 (DL II 2510 + melded array)
- 2 x Titan 39 (BP102 - 14"W)
- 2 x Titan 39 (3012LF - 20"W)
- 4 x DR200 (Delta Pro 8B + melded array)

uneasyrider
Posts: 1
Joined: Sat May 17, 2025 12:36 am

Re: Any Interest in a Rig That Includes 4xDR200 and 2xT39?

#10 Post by uneasyrider »

Interested in the DR200s, and if the T39 sale goes through those as well

User avatar
David Carter
Posts: 1833
Joined: Mon Jan 01, 2007 7:20 am
Location: (East) Tennessee, USA

Re: Any Interest in a Rig That Includes 4xDR200 and 2xT39?

#11 Post by David Carter »

uneasyrider wrote: Thu Jul 03, 2025 5:28 pm Interested in the DR200s, and if the T39 sale goes through those as well
Thanks for your interest. I tried to PM you, but for some reason my messages are just getting saved in the “outbox” folder but not sending. Can you PM me your email address so we can communicate that way? Thanks!
Dave

Built:
- Omni 10 (S2010 + piezo array)
- 2 x DR250 (DL II 2510 + melded array)
- 2 x Titan 39 (BP102 - 14"W)
- 2 x Titan 39 (3012LF - 20"W)
- 4 x DR200 (Delta Pro 8B + melded array)

Bruce Weldy
Posts: 8546
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Any Interest in a Rig That Includes 4xDR200 and 2xT39?

#12 Post by Bruce Weldy »

David Carter wrote: Fri Jul 04, 2025 7:38 am
uneasyrider wrote: Thu Jul 03, 2025 5:28 pm Interested in the DR200s, and if the T39 sale goes through those as well
Thanks for your interest. I tried to PM you, but for some reason my messages are just getting saved in the “outbox” folder but not sending. Can you PM me your email address so we can communicate that way? Thanks!
Your inbox may be full.....try deleting some old PMs...

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

User avatar
David Carter
Posts: 1833
Joined: Mon Jan 01, 2007 7:20 am
Location: (East) Tennessee, USA

Re: Any Interest in a Rig That Includes 4xDR200 and 2xT39?

#13 Post by David Carter »

Bruce Weldy wrote: Fri Jul 04, 2025 8:56 am
David Carter wrote: Fri Jul 04, 2025 7:38 am
uneasyrider wrote: Thu Jul 03, 2025 5:28 pm Interested in the DR200s, and if the T39 sale goes through those as well
Thanks for your interest. I tried to PM you, but for some reason my messages are just getting saved in the “outbox” folder but not sending. Can you PM me your email address so we can communicate that way? Thanks!
Your inbox may be full.....try deleting some old PMs...
I thought of that also, but no matter how many PMs I delete, it still keeps doing the same thing. I was sending messages just fine to another user just a couple of days ago, but now, whenever I click '''Submit," it just saves it in the Outbox folder.
Dave

Built:
- Omni 10 (S2010 + piezo array)
- 2 x DR250 (DL II 2510 + melded array)
- 2 x Titan 39 (BP102 - 14"W)
- 2 x Titan 39 (3012LF - 20"W)
- 4 x DR200 (Delta Pro 8B + melded array)

User avatar
David Carter
Posts: 1833
Joined: Mon Jan 01, 2007 7:20 am
Location: (East) Tennessee, USA

Re: Any Interest in a Rig That Includes 4xDR200 and 2xT39?

#14 Post by David Carter »

David Carter wrote: Fri Jul 04, 2025 7:38 am
uneasyrider wrote: Thu Jul 03, 2025 5:28 pm Interested in the DR200s, and if the T39 sale goes through those as well
Thanks for your interest. I tried to PM you, but for some reason my messages are just getting saved in the “outbox” folder but not sending. Can you PM me your email address so we can communicate that way? Thanks!
Never mind. I just saw that your email was in the first PM you sent. Will contact you shortly. Thanks!
Dave

Built:
- Omni 10 (S2010 + piezo array)
- 2 x DR250 (DL II 2510 + melded array)
- 2 x Titan 39 (BP102 - 14"W)
- 2 x Titan 39 (3012LF - 20"W)
- 4 x DR200 (Delta Pro 8B + melded array)

Joman116
Posts: 9
Joined: Sat Jun 21, 2025 4:40 pm
Location: Dallas, TX

Re: Any Interest in a Rig That Includes 4xDR200 and 2xT39?

#15 Post by Joman116 »

David Carter wrote: Tue Jul 01, 2025 8:58 pm SOLD the T39s, QSC amp, and Driverack 260.
Happy customer over here! Thanks for collaborating with the sale and getting it shipped to me, Dave. Glad the community is trustworthy.

To anyone else interested in the rest of his equipment, David is honest and trustworthy!

Plan on posting a review in the appropriate forum soon. These two t39s are slamming so far in my garage!

Post Reply