Australian Options - Suppliers / Drivers etc

Helpful hints on how to build 'em, and where to get the stuff you need.
Post Reply
Message
Author
Keryn O'Shea
Posts: 559
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Australian Options - Suppliers / Drivers etc

#181 Post by Keryn O'Shea »

Thank you for your responses gentlemen, it's hard to pass up anything Eminence over here, l may give these a miss though.
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FA, J12 FA, OT8 CD, OT12 FA, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 MA, XF210. Next J10L

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28916
Joined: Tue May 02, 2006 5:59 pm

Re: Australian Options - Suppliers / Drivers etc

#182 Post by Bill Fitzmaurice »

Depending on the price you might want to get them. The availability of recone kits is probably no worse than for any other driver.

Keryn O'Shea
Posts: 559
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Australian Options - Suppliers / Drivers etc

#183 Post by Keryn O'Shea »

Ok, can you remember their price?
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FA, J12 FA, OT8 CD, OT12 FA, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 MA, XF210. Next J10L

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28916
Joined: Tue May 02, 2006 5:59 pm

Re: Australian Options - Suppliers / Drivers etc

#184 Post by Bill Fitzmaurice »

They retailed for $180 USD.

Bruce Weldy
Posts: 8538
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Australian Options - Suppliers / Drivers etc

#185 Post by Bruce Weldy »

Bill Fitzmaurice wrote: Fri Apr 05, 2024 3:48 pm They retailed for $180 USD.
Wow, I had to go all the way back to the 2016 price list to find that one. Can't believe it's been that long!

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

User avatar
Seth
Posts: 3007
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Australian Options - Suppliers / Drivers etc

#186 Post by Seth »

In researching for an unrelated subject, I came across this forwarding service that looks like it could be helpful getting stuff into Australia, possibly sidestepping some of the usual fees and taxes. Didn't read too deeply into it, but thought of you guys when I saw it. May or may not be a useful service.

https://www.colisexpat.com/en/delivery- ... australia/
Build in process - 2 WH6, one Alpha 6a loaded, one PRV Audio 6MB250-NDY loaded

Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Keryn O'Shea
Posts: 559
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Australian Options - Suppliers / Drivers etc

#187 Post by Keryn O'Shea »

Seth wrote: Tue Apr 09, 2024 10:47 pm ..I came across this forwarding service that looks like it could be helpful getting stuff into Australia..
Nice! They might be helpful for a bulk load of 1016s & GT302s
20240416_174156.jpg
Managed to win the auction and land the pair of 3010MBs for $360au plus $25au shipping.. glad you suggested to grab them Bill.
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FA, J12 FA, OT8 CD, OT12 FA, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 MA, XF210. Next J10L

Bruce Weldy
Posts: 8538
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: Australian Options - Suppliers / Drivers etc

#188 Post by Bruce Weldy »

Keryn O'Shea wrote: Tue Apr 16, 2024 2:58 am
Managed to win the auction and land the pair of 3010MBs for $360au plus $25au shipping..
Wow! Stuff is really expensive for you guys over there....

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Keryn O'Shea
Posts: 559
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Australian Options - Suppliers / Drivers etc

#189 Post by Keryn O'Shea »

Bruce Weldy wrote: Tue Apr 16, 2024 11:08 am ..Stuff is really expensive for you guys over there....
A LAB15 is $639au, and one 1016 ends up costing around $8au ea :shock: , it's always been the case Bruce but it's ok :)
I thought the 3010MB win was good value, it's what you'd have paid in the US.. and our dollar is 0.65US atm.
l've found a bolt on 60w compression driver from Ande I'll try and report back on, specs are vague, but other drivers from the same brand have been approved
https://www.jdsound.com.au/ande-d340-60 ... river.html
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FA, J12 FA, OT8 CD, OT12 FA, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 MA, XF210. Next J10L

Keryn O'Shea
Posts: 559
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Australian Options - Suppliers / Drivers etc

#190 Post by Keryn O'Shea »

Quickly setup running an SLA, the OTop8 horn, bi-amped & crossed over at 2k with zero EQ, the D340s sound great.. smooth & loud straight up :)
20240421_100627.jpg
Minimal EQ would have these CDs sounding sweet, they'll load into J110Lites & I'll give them a proper run.
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FA, J12 FA, OT8 CD, OT12 FA, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 MA, XF210. Next J10L

Keryn O'Shea
Posts: 559
Joined: Sat Jan 26, 2013 5:50 pm
Location: Brisbane, Australia

Re: Australian Options - Suppliers / Drivers etc

#191 Post by Keryn O'Shea »

"Ceceres" has the Eminence adjustable top hat
https://www.ceceres.com.au/products/emi ... 5522294850
and 3015LFs in stock at the moment
https://www.ceceres.com.au/products/emi ... 5425236034
AT8 14", AT10 19", T30 28" LAB12, T48 36" 3015LF, THT 20" LAB15, SLA 4x3"/4x4", CArray 6x4", TLAH, TLAP, J10 FA, J12 FA, OT8 CD, OT12 FA, OT15 CD, SLAP 2x6"/4x6", WH8, DR280 MA, XF210. Next J10L

Post Reply