New HF Driver from Eminence

Anything not covered elsewhere.
Post Reply
Message
Author
Bruce Weldy
Posts: 8366
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

New HF Driver from Eminence

#1 Post by Bruce Weldy »

Eminence just came out with a new driver. It's the N210T-8

https://eminence.com/collections/1-high ... -neodymium

It looks like it's a good replacement for the old NSD2005 that was discontinued. Specs look about the same and it's got a 2" diaphragm as opposed to the 1.5" on the F151M that has been the replacement for using the 1.2k crossover.

Bill, does it get your blessing?

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

Bruce Weldy
Posts: 8366
Joined: Fri Nov 27, 2009 11:37 am
Location: New Braunfels, TX

Re: New HF Driver from Eminence

#2 Post by Bruce Weldy »

And an update on the F151M.....it's still not being built and may not ever be. Because of the issues with it, I'd suggest not even using them if you can find some still in stock somwhere.

6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210


"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28708
Joined: Tue May 02, 2006 5:59 pm

Re: New HF Driver from Eminence

#3 Post by Bill Fitzmaurice »

It looks good, but it's expensive. As for the F151M, one alternative is the LaVoce DN10.142.

Post Reply