DR250 replacement parts

For unmatched sensitivity.
Post Reply
Message
Author
djtrumptight
Posts: 823
Joined: Tue Dec 15, 2009 6:08 pm
Location: Detroit,Michigan

DR250 replacement parts

#1 Post by djtrumptight »

Hey hey,I hope everyone is doing fine,I have a question.Can I replace one of these white 30ohm resistors with the green one ? I thought I would ask,as u see I do have a new white replacement but it’s part of my kit for my next pair of DR250’s that I have been planning to build for 2 years and I didn’t wanna start taking parts out of the kit.
Built:
2 Autotuba's MCM 55 2421
8 T48's 24"wide 3015 LF
2 DR 250's melded Deltalite II 2510
2 DR 250's flat Deltalite II 2510
2 SLA HT systems
1 Table Tuba Dayton DCS 255-4
2 T 39's 20" wide 3012 LF
1 T-18 13" wide MCM 55 2421
2 SLA Pro's
Top
djtrumptight
Posts: 823
Joined: Tue Dec 15, 2009 6:08 pm
Location: Detroit,Michigan

Re: DR250 replacement parts

#2 Post by djtrumptight »

For some reason the picture won’t post but I have a round green colored 30ohm resistor,specs are: 30 ohm,10 watt,1%
Built:
2 Autotuba's MCM 55 2421
8 T48's 24"wide 3015 LF
2 DR 250's melded Deltalite II 2510
2 DR 250's flat Deltalite II 2510
2 SLA HT systems
1 Table Tuba Dayton DCS 255-4
2 T 39's 20" wide 3012 LF
1 T-18 13" wide MCM 55 2421
2 SLA Pro's
Top
User avatar
Bill Fitzmaurice
Site Admin
Posts: 28916
Joined: Tue May 02, 2006 5:59 pm

Re: DR250 replacement parts

#3 Post by Bill Fitzmaurice »

30 ohms is 30 ohms. Electrons are colorblind.
Top
djtrumptight
Posts: 823
Joined: Tue Dec 15, 2009 6:08 pm
Location: Detroit,Michigan

Re: DR250 replacement parts

#4 Post by djtrumptight »

Ok,thanks Bill.
Built:
2 Autotuba's MCM 55 2421
8 T48's 24"wide 3015 LF
2 DR 250's melded Deltalite II 2510
2 DR 250's flat Deltalite II 2510
2 SLA HT systems
1 Table Tuba Dayton DCS 255-4
2 T 39's 20" wide 3012 LF
1 T-18 13" wide MCM 55 2421
2 SLA Pro's
Top
Post Reply

Return to “DR Horn Loaded Bass/Keyboard/PA Speakers”