Got 'em all! Now....sla vs jack vs omni vs dr vs other

Combining subs, tops and all the rest of your kit.
Message
Author
User avatar
Tom Smit
Posts: 7446
Joined: Sat Jan 05, 2008 1:24 pm
Location: Sarnia, Ont. Canada

Re: Got 'em all! Now....sla vs jack vs omni vs dr vs other

#46 Post by Tom Smit »

Bill Fitzmaurice wrote: Mon Dec 26, 2022 11:15 am There's nothing terribly difficult, just take it one step at a time, and be sure of what you're trying to do before you do it.
+1

Many years ago, I built a pair of DR250s, with melded arrays, on the hood of a retired Volvo 745 in my backyard (I had minimal wood-working skills back then).
TomS

Fastskiguy
Posts: 176
Joined: Tue Dec 20, 2011 8:11 pm

Re: Got 'em all! Now....sla vs jack vs omni vs dr vs other

#47 Post by Fastskiguy »

You guys make a compelling argument for giving the DR200 a shot. I've got a little wood sitting around, maybe I'll take a crack at the horn and see how it goes. If I can get the horn done without going stark raving mad then I can take the next step. Thanks again :)

Joe

Fastskiguy
Posts: 176
Joined: Tue Dec 20, 2011 8:11 pm

Re: Got 'em all! Now....sla vs jack vs omni vs dr vs other

#48 Post by Fastskiguy »

BZB set me up with two omni top 12 drivers so.....it begins!!

viewtopic.php?t=26406

Fastskiguy
Posts: 176
Joined: Tue Dec 20, 2011 8:11 pm

Re: Got 'em all! Now....sla vs jack vs omni vs dr vs other

#49 Post by Fastskiguy »

I'm making some progress on the Top 12's and thinking about a sub...have gone all over the map from small table tuba to titan 48 and everything in between. Leaning towards Tuba 24 but I have a question about the charts and the directions....charts show 90db at about 34 hz with a single T24 but the notes say "Groups of less than four cabs should be high-passed at 45 Hz. With four cabs or more 40 Hz is acceptable." Now this might be more theoretical if we're talking music but can you run a single T24 down to 35hz or do you need to keep it at 45hz? (I can move this question to a new thread if it's appropriate) Thanks :)

Joe

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28588
Joined: Tue May 02, 2006 5:59 pm

Re: Got 'em all! Now....sla vs jack vs omni vs dr vs other

#50 Post by Bill Fitzmaurice »

A single T24 isn't enough in terms of both extension and output to go with a pair of OTop 12.

Fastskiguy
Posts: 176
Joined: Tue Dec 20, 2011 8:11 pm

Re: Got 'em all! Now....sla vs jack vs omni vs dr vs other

#51 Post by Fastskiguy »

T30 it is, thanks!!

User avatar
Bill Fitzmaurice
Site Admin
Posts: 28588
Joined: Tue May 02, 2006 5:59 pm

Re: Got 'em all! Now....sla vs jack vs omni vs dr vs other

#52 Post by Bill Fitzmaurice »

Or T45, which is easier to transport.

Post Reply