for me above. I believe I have those connected properly. I am at a mini-stop as I believe I know what I need to
do but I need to confirm with you guys first. I see in Seth's diagram where one set of the wires to the amp get
connected. Am I correct in thinking that the remaining pair of wires get connected as so: The remaining positive
wire gets connected near the upper-mid right of the diagram near the two zip-tied capacitors and the left over
positive is connected near the bottom using the spare positive terminal to the left of the inked line. Thanks for
any help you guys are able to provide.
Here is the stage I am at on the first one:

Please point out any issues you might recognize and as always any advice is appreciated.
Also remember you can right-click and open in new tab for full-res image. Thanks