Broken Links- re Driver Break in

Anything not covered elsewhere.
Post Reply
Message
Author
Grant Bunter
Posts: 6912
Joined: Mon Nov 28, 2011 11:12 am
Location: Ilfracombe Queensland Australia
Contact:

Broken Links- re Driver Break in

#1 Post by Grant Bunter »

I was reading an (old) electronics mag the other day and (re)discovered a "discussion" on driver break in.
Went to the "Look here first" section to refresh myself.
Low and behold, clicking on the gr research links returned a 404 error.
Couldn't find anything after diverting back to the home page either...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...

User avatar
Bill Fitzmaurice
Site Admin
Posts: 29090
Joined: Tue May 02, 2006 5:59 pm

Re: Broken Links- re Driver Break in

#2 Post by Bill Fitzmaurice »


jimbo7
Posts: 877
Joined: Fri Dec 28, 2012 10:45 am
Location: St. Louis

Re: Broken Links- re Driver Break in

#3 Post by jimbo7 »

Grant Bunter wrote: Wed Jul 28, 2021 3:57 pm Low and behold, clicking on the gr research links returned a 404 error.
Couldn't find anything after diverting back to the home page either...
Wayback Machine:
https://web.archive.org/web/20120623052 ... m.php?f=10

Sometimes you can dig up old forum stuff from there
BFM builds:
XF212
T24 BP102 24"
2x SLA's 6-5" mids, 9- gt-302's
2x AT 14" MCM 55-2421
TrT 5" MCM 55-2421
AT 18" JBL GTO804
2x OT12 flat array
2x SLA Pro 2-Alpha 6's 2-Goldwoods
2x T39 24" 3012lf
Simplex 10 BP102

User avatar
Seth
Posts: 3130
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Broken Links- re Driver Break in

#4 Post by Seth »

There's also a broken link in the "Got a question, look here first" section, in the Do you have a horn for an 18 inch driver? thread.

The first two images also don't load for me, even though the address appears to be correct (without www.)
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

User avatar
Bill Fitzmaurice
Site Admin
Posts: 29090
Joined: Tue May 02, 2006 5:59 pm

Re: Broken Links- re Driver Break in

#5 Post by Bill Fitzmaurice »

They're there for me.

User avatar
Seth
Posts: 3130
Joined: Thu Sep 10, 2009 8:06 pm
Location: Sacramento, California, USA
Contact:

Re: Broken Links- re Driver Break in

#6 Post by Seth »

:thumbsup:
Two 2x6 shorty SLA Pro's
One T39, 16", 3012LF loaded
Tall AutoTuba, 20" wide, 2x 8" MCM 55-2421
TruckTuba, 8½" wide, 2x 8" MCM 55-2421

Post Reply