Notches in 1016s

[climbikejk]

Quick question -- how "bad" are these notches in 1016s? When they're glued to adjacent 1016s, are these gaps going to be significant/create air gaps or when they're placed on speaker foam will these gaps not matter?

Thanks

notches.jpg

[Bill Fitzmaurice]

Cut down to size as recommended I doubt those gaps will remain.

[climbikejk]

The notches on tweeters B, C, and D are after being cut (A is uncut). (Probably should have said that initially)

[Tom Smit]

Are you building an SLA? Those tweets are likely okay, and, if not, you could add some adhesive mixed with your cut-offs and carefully fill the holes in. Use masking/painters tape to create a "form".