....however my good buddy KDrums decided to go with a BFM rig after hearing mine on several occasions. He didn't require anything as large as my rig but he did decide on the T-48's so that we could cross use the systems for bigger shows. he built the 2 driver SLA's first so that we could do a listen test.....low and behold we were astonished how they sounded after little "Smaart" work. Next step was to purchase the 4 driver version flat packs from Leland and he, as always shipped the kit out like yesterday. We did slightly change the build process of the Sla's by using biscuits for assembly which saved a ton of time. Total build time of the 2 boxes was about 3 hours, not sure how much time it took to do the grills, Duratex, driver and x-over mounting. The review??? there is not enough room on Bill's server to type all the positives comments. Here is a short video taken at 80' from stage with a DSLR camera using its on-board Mic. Other gear used 2 driver Sla pro's for side fills, PLX3602's, DCX2496 and S3L console.https://youtu.be/--okbwBsTFU
