Speakerhardware.com

[DJPhatman]

Leland, can the new braces be cut 1/8" oversize using 3/8" BB? Or, would that have to be "custom ordered"?

[LelandCrooks]

That would be a custom, and dependent on the availability of 3/8. I expect we'd have up charge for the full sheet needed, I don't know about the extra coding. If it's for weight, these are really light with the cutouts.

[ncgrove]

Leland, can the new braces be cut 1/8" oversize using 3/8" BB? Or, would that have to be "custom ordered"?

Just glue a strip of 1/8 BB to an edge of the brace and you'll be set.

[DJPhatman]

Leland, can the new braces be cut 1/8" oversize using 3/8" BB? Or, would that have to be "custom ordered"?

Just glue a strip of 1/8 BB to an edge of the brace and you'll be set.

Are they 1/4"?

[LelandCrooks]

1/2

[Joman116]

Duratex is on the way. Should be in stock the by the 28th of Nov. Will be on the site available to order sometime today, Nov 20th.

Roller grade $49.50 gallon
Spray Grade $49.50 gallon
HiBuild $55.95 gallon.

In 5's $1 less per gallon.

Prices are the same as Acrytech. Freight will be way less from me, (unless you're closer to them) especially if I can ship to a business address.

Man roller grade duratex was under $50 a gallon when this was posted (2007). It's $88 on the site now

[Bruce Weldy]

Man roller grade duratex was under $50 a gallon

And I was only 49 years old......wish both were still true.

[Joman116]

Man roller grade duratex was under $50 a gallon

And I was only 49 years old......wish both were still true.

I had just started my twenties. I believe that was the first time I first started reading up on bfm designs. Was very intrigued but didn't have the time, finances, or space as I was still in college.

[Bruce Weldy]

Man roller grade duratex was under $50 a gallon

And I was only 49 years old......wish both were still true.

I had just started my twenties. I believe that was the first time I first started reading up on bfm designs. Was very intrigued but didn't have the time, finances, or space as I was still in college.

You're about the same age as my son. He lives up in your area in Addison.

[Joman116]

And I was only 49 years old......wish both were still true.

I had just started my twenties. I believe that was the first time I first started reading up on bfm designs. Was very intrigued but didn't have the time, finances, or space as I was still in college.

You're about the same age as my son. He lives up in your area in Addison.

Sweet, about 20min. He into sound?

[Bruce Weldy]

Sweet, about 20min. He into sound?

No, he never really got into playing or running sound although he listens to and likes music. He has however, toted a few heavy pieces of gear over the years for me.

He's an architect.