4x Titan 48. 3015LF 36''

[Middelkevin]

Hello,

A day ago I started to build 4 titan's 48.
I'm going to load them with Eminence 3015LF and I'm going to make it maximum width.

I'm just started with one side, Today I'm going to get some birch and then I will go on.
I'm going to build them all together.

The amp that I will be using for the subs is a Synq 2k2
This means I will put 2 titan's per channel at 1100W per channel.
I think this must be enough?

Here is a picture of what I've done so far, but I will upload a lot more this week.



I'll keep you updated

[Middelkevin]

It's been a busy weekend, I'm allmost done with the first cab.
I followed the plans securely and I didn't find any problems during the build.
I found them much easyer to build than Jack.
Tonight I will fit the last braces and the hole for the speakon connections so I can paint them this week.

Here are some pictures!

First I started with the side, I screwed and glued the first panels on.


The baffle:



The chamber is now done:



I forgot to take picture's during the build so I've missed a couple steps:















Allmost ready for the second side, first some bracing is need to be done:






Build this in my workshop:


That's it for now!

[Scott Brochu]

Nice build and nice workshop. Very tidy

[shawn_g]

Those are going to be beastly.

[Arben]

Very nice, looks good, same goes to your workshop

[Middelkevin]

Thanks all!
I like my workshop clean so I can work comfortable.

I'm building the titan's one by one so I can build them with precision.
I don't want to look over any steps so I take all the time I need.
But what are the titans big! They really are big!
I can't wait till I finished them and when I can hear them!

[SimonD]

Nice job but the workshop is far too tidy, It's just not healthy like that

[Grant Bunter]

Great work and excellent tidy clean workshop!

Haven't seen Harley around for a while, but I would like to nominate you for one of his awards

[escapemcp]

Great work and excellent tidy clean workshop!

Haven't seen Harley around for a while, but I would like to nominate you for one of his awards

He's probably re-arranging his tools into alphabetical order

[Middelkevin]

Great work and excellent tidy clean workshop!

Haven't seen Harley around for a while, but I would like to nominate you for one of his awards

It's easy to keep everything clean, and my work goes a lot quicker in a clean workshop

Does anyone know how many braces I have to install at the horn mouth?
I know in my sketchup are used 3 but I've seen some 36'' width with 2 braces?

[Titanium Hand]

Nice Build mate.

Re: Braces, use three for sure it would be in the plans definitely. They would be around 9 inches centre to centre, don't want to waste any glorious output on flexing the cabs timber

[Middelkevin]

Nice Build mate.

Re: Braces, use three for sure it would be in the plans definitely. They would be around 9 inches centre to centre, don't want to waste any glorious output on flexing the cabs timber

Thanks!
I will use three braces. I will saw them after work and install them.
I've filled al the screw holes and I think it will be ready for primer tomorrow.

[J_Dunavin]

Them are huge!!
What are they going to be used for?

[Middelkevin]

I'm using them for live music and for some dj music.
Titan nr.1 is done and the second one is also nearly finished.

Here are some pictures:





They're beasts!

[Tom Smit]

They are beasts!