The top horn pictured here is the one I can't find! http://www.billfitzmaurice.com/OmniTop15.html
Could use some help finding something on the CD!
Could use some help finding something on the CD!
On the site, under Omnitop 15 there are two different cabinets pictured. The one on the top I can't find in the plans on my CD. I probably am overlooking it, or it could have been an accidental omission. I really think that both of these have the potential to come into play depending on a number of variables. Hopefully you can guys can help me find it!
The top horn pictured here is the one I can't find! http://www.billfitzmaurice.com/OmniTop15.html
The top horn pictured here is the one I can't find! http://www.billfitzmaurice.com/OmniTop15.html
In order to have a dream come true, you must first dream it!
-
Bruce Weldy
- Posts: 8585
- Joined: Fri Nov 27, 2009 11:37 am
- Location: New Braunfels, TX
Re: Could use some help finding something on the CD!
That's a melded array......it's definitely in the plans. If you mean the box itself, that's an older picture of an older version of the OT15.
Not many build the OT15 as the OT12 is all you need with subs....and is smaller and lighter.
Not many build the OT15 as the OT12 is all you need with subs....and is smaller and lighter.
6 - T39 3012LF
4 - OT12 2512
1 - T24
1 - SLA Pro
2 - XF210
"A system with a few knobs set up by someone who knows what they are doing is always better than one with a lot of knobs set up by someone who doesn't."
-
BrentEvans
- Posts: 3041
- Joined: Thu Oct 09, 2008 10:38 am
- Location: Salisbury, NC
Re: Could use some help finding something on the CD!
That's an older OT15. The newer ones dont have the extra throat pieces.
99% of the time, things that aren't already being done aren't being done because they don't work. The other 1% is split evenly between fools and geniuses.
Re: Could use some help finding something on the CD!
Yeah, I was talking about the box, not the array. It is part of why ordered the CD. I have to wonder what all size variations that came in, and are those plans available at all!
In order to have a dream come true, you must first dream it!
-
Grant Bunter
- Posts: 6912
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: Could use some help finding something on the CD!
The plans on your CD are the latest versions.
Plans are updated when there is improvement to any given cabs design.
I guess Bill might have older plan versions...
Plans are updated when there is improvement to any given cabs design.
I guess Bill might have older plan versions...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
-
Bill Fitzmaurice
- Site Admin
- Posts: 28968
- Joined: Tue May 02, 2006 5:59 pm
Re: Could use some help finding something on the CD!
I don't. They're not as good as the latest version, so why would I keep them?Grant Bunter wrote: I guess Bill might have older plan versions...
-
Grant Bunter
- Posts: 6912
- Joined: Mon Nov 28, 2011 11:12 am
- Location: Ilfracombe Queensland Australia
- Contact:
Re: Could use some help finding something on the CD!
Err Reference, Prosperity, Because.Bill Fitzmaurice wrote:I don't. They're not as good as the latest version, so why would I keep them?
No idea really...
Built:
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
DR 250: x 2 melded array, 2x CD horn, March 2012 plans.
T39's: 4 x 20" KL3010LF , 2 x 28" 3012LF.
WH8: x 6 with melded array wired series/parallel.
Bunter's Audio and Lighting "like"s would be most appreciated...
Re: Could use some help finding something on the CD!
Looking for solutions, rather than creating problems .....would there be a possibility of a rework of that horn, preferably in an 8" or 10" version be in the not to incredibly distant future. I do realize btw, that that horn does have some very specific needs from the driver and that request may not be feasible. Drivers without really strong cone material will self destruct under the load. That may be a part of why you discontinued it.Bill Fitzmaurice wrote:I don't. They're not as good as the latest version, so why would I keep them?Grant Bunter wrote: I guess Bill might have older plan versions...
Horns like that also don't use as much Xmax to drive the horn, but require exceptional heat dissipation as well and thus the Xmax still has to be high! Those requirements may have created some undue headaches for you from those that didn't head the driver requirement warnings...just guessing, but pretty likely.
Anyway, I am not over stressing on it, but still hoping!
If you do happen to run across a set that wasn't deleted, you have my Email! Probably not going to happen, but worth a try!
In order to have a dream come true, you must first dream it!
-
Bill Fitzmaurice
- Site Admin
- Posts: 28968
- Joined: Tue May 02, 2006 5:59 pm
Re: Could use some help finding something on the CD!
No, because the current version works better.bjm362 wrote:would there be a possibility of a rework of that horn,