SLA ht build

[lancemhorsley]

I am 25 and am starting to hate getting old.

Old? I've got hemorrhoids that are older than you are!

LOL Well I hope they don't hurt as bad as this 25 year old injury!

[lancemhorsley]

Here are some pictures of the finishing process. This is 3 days in the making a little more than half way done applying finish and then buffing begins.

[Bas Gooiker]

Your cabs look nearly pornographic!

I never understood why people put screws in the front baffle anyways. But seeing them in your piece of beauty made me cry a little.

[Ian Westwood]

But seeing them in your piece of beauty made me cry a little.

I think I just peed a little bit...

[Bas Gooiker]

But seeing them in your piece of beauty made me cry a little.

I think I just peed a little bit...

Are you screwing with me Ian? Just because i feel those screws screw up the baffle?

Screw it...

[Ian Westwood]

Screw it...

Personally I hate seeing screws... and I'm sure he's not done yet... and this is a fantastic build. Kudos to the OP.

[lancemhorsley]

Your cabs look nearly pornographic!

I never understood why people put screws in the front baffle anyways. But seeing them in your piece of beauty made me cry a little.

Well I thought I was one of those freaks that preferred the screws in the front, But turns out I don't like them either. I am going to look for smaller screw heads so they are not as noticeable.

[lancemhorsley]

So after waiting patiently for the speakers to arrive they do and I am stoked to get one put together. So I set them in place to make sure they fit nice, and then i leave the room for a short second. When I return I see my son pushing and making dents in each. He ended up doing this to 3 speakers is there a simple way to pop the dent back out? I sure hope so.

[Michael Ewald Hansen]

So after waiting patiently for the speakers to arrive they do and I am stoked to get one put together. So I set them in place to make sure they fit nice, and then i leave the room for a short second. When I return I see my son pushing and making dents in each. He ended up doing this to 3 speakers is there a simple way to pop the dent back out? I sure hope so.

Sure, you can easily pop them back out if you use a piece of cardboard roll and your vacuum cleaner and gently suck them back into shape

[iamlowsound]

So after waiting patiently for the speakers to arrive they do and I am stoked to get one put together. So I set them in place to make sure they fit nice, and then i leave the room for a short second. When I return I see my son pushing and making dents in each. He ended up doing this to 3 speakers is there a simple way to pop the dent back out? I sure hope so.

Sure, you can easily pop them back out if you use a piece of cardboard roll and your vacuum cleaner and gently suck them back into shape

I had that happen and I just used my mouth to pop them back out.

lowsound

[subharmonic]

I used some semi sticky stuff....like rope caulk. It was the stuff PE sells for speaker gasketing. I wouls suppose tape un adhesived a bit (stick it to your shirt a couple times first) or one of those stretchy slap hand toys would work too.

[LelandCrooks]

Those are spectacular. Utterly.

[lancemhorsley]

Thanks electrical tape worked great!

Those are spectacular. Utterly.

Thank you, The crossovers arrived and they look great!

[lancemhorsley]

So I have finally completed one! But have yet to hear It, I still need to purchase a AVR, hopefully I can get one here soon.

[MissileCrisis]

I would love to hear a comparison between the SLA's and the H80m's. My friend has the yamahas and I'm building TLAH's .