First Omni 15 Full Range build...

Post your build odyssey here.
Post Reply
Message
Author
User avatar
All Thumbs
Posts: 72
Joined: Mon Feb 18, 2013 5:04 pm
Location: Burnley, UK
Contact:
Contact All Thumbs

Re: First Omni 15 Full Range build...

#16 Post by All Thumbs »

Sexy metal Bill Fitzmaurice badges arrived direct from the States thanks to http://www.speakerhardware.com/ :-)

Image
First time builder of 2 x Omni 15 Full Range - wish me luck :-)

Scott Whitley Bass Guitar Services
Web: http://www.scott-whitley.com
Facebook: http://www.facebook.com/scott.whitley.bass.services
Top
User avatar
All Thumbs
Posts: 72
Joined: Mon Feb 18, 2013 5:04 pm
Location: Burnley, UK
Contact:
Contact All Thumbs

Re: First Omni 15 Full Range build...

#17 Post by All Thumbs »

So that's everything up to date.

Today looks like a nice sunny day here in the UK so I'm seriously hoping to get one cab to near completion today!!!

Will post progress pic's later....
First time builder of 2 x Omni 15 Full Range - wish me luck :-)

Scott Whitley Bass Guitar Services
Web: http://www.scott-whitley.com
Facebook: http://www.facebook.com/scott.whitley.bass.services
Top
User avatar
All Thumbs
Posts: 72
Joined: Mon Feb 18, 2013 5:04 pm
Location: Burnley, UK
Contact:
Contact All Thumbs

Re: First Omni 15 Full Range build...

#18 Post by All Thumbs »

Really, really, really p*ssed off!!!!!

Just went out to leisurely trim the horns to size as described in Bill's plans only completely wreck the past two days work!!!!!

With each cut things got steadily worse. Nightmare :wall: :cussing:

Image
First time builder of 2 x Omni 15 Full Range - wish me luck :-)

Scott Whitley Bass Guitar Services
Web: http://www.scott-whitley.com
Facebook: http://www.facebook.com/scott.whitley.bass.services
Top
User avatar
All Thumbs
Posts: 72
Joined: Mon Feb 18, 2013 5:04 pm
Location: Burnley, UK
Contact:
Contact All Thumbs

Re: First Omni 15 Full Range build...

#19 Post by All Thumbs »

Oh well, nobody died I guess!

Time to make another two :-(
First time builder of 2 x Omni 15 Full Range - wish me luck :-)

Scott Whitley Bass Guitar Services
Web: http://www.scott-whitley.com
Facebook: http://www.facebook.com/scott.whitley.bass.services
Top
User avatar
Chris_Allen
Posts: 3358
Joined: Wed Jul 11, 2007 2:43 pm
Location: Huddersfield, UK

Re: First Omni 15 Full Range build...

#20 Post by Chris_Allen »

Using lesser grade ply on internal components is fine - the big advantage to birch is that it resists dents far better due to it's strength. On the mid horn, that's not applicable, though, birch is much nicer to work with.

When trimming the tops of the horn, I would build a small 'L' shaped sled to put it on so your edge with your fence is straight.
Built:
6xDR200, 2xT39, 2xT48, 2xJack110, 1xOmni10.5, 1xAutotuba, 1xT18, 1xSLA Pro, 1xW8, 1xW10
Top
User avatar
LelandCrooks
Posts: 7242
Joined: Thu May 04, 2006 9:36 am
Location: Midwest/Kansas/Speaker Nirvana
Contact:
Contact LelandCrooks

Re: First Omni 15 Full Range build...

#21 Post by LelandCrooks »

Happens to the best of us on the throats. Saw sled, go very slowly.
If it's too loud, you're even older than me! Like me.
http://www.speakerhardware.com
Top
User avatar
All Thumbs
Posts: 72
Joined: Mon Feb 18, 2013 5:04 pm
Location: Burnley, UK
Contact:
Contact All Thumbs

Re: First Omni 15 Full Range build...

#22 Post by All Thumbs »

LelandCrooks wrote:Happens to the best of us on the throats. Saw sled, go very slowly.
Yeah cheers for the advice - just making a sled now. Thought going up against the table saw fence would have sufficed but obviously not lol!
First time builder of 2 x Omni 15 Full Range - wish me luck :-)

Scott Whitley Bass Guitar Services
Web: http://www.scott-whitley.com
Facebook: http://www.facebook.com/scott.whitley.bass.services
Top
User avatar
All Thumbs
Posts: 72
Joined: Mon Feb 18, 2013 5:04 pm
Location: Burnley, UK
Contact:
Contact All Thumbs

Re: First Omni 15 Full Range build...

#23 Post by All Thumbs »

Chris_Allen wrote:Using lesser grade ply on internal components is fine - the big advantage to birch is that it resists dents far better due to it's strength. On the mid horn, that's not applicable, though, birch is much nicer to work with.

When trimming the tops of the horn, I would build a small 'L' shaped sled to put it on so your edge with your fence is straight.
Thanks for the tip Chris!
First time builder of 2 x Omni 15 Full Range - wish me luck :-)

Scott Whitley Bass Guitar Services
Web: http://www.scott-whitley.com
Facebook: http://www.facebook.com/scott.whitley.bass.services
Top
User avatar
All Thumbs
Posts: 72
Joined: Mon Feb 18, 2013 5:04 pm
Location: Burnley, UK
Contact:
Contact All Thumbs

Re: First Omni 15 Full Range build...

#24 Post by All Thumbs »

So I made a sled/jig....

Image
First time builder of 2 x Omni 15 Full Range - wish me luck :-)

Scott Whitley Bass Guitar Services
Web: http://www.scott-whitley.com
Facebook: http://www.facebook.com/scott.whitley.bass.services
Top
User avatar
All Thumbs
Posts: 72
Joined: Mon Feb 18, 2013 5:04 pm
Location: Burnley, UK
Contact:
Contact All Thumbs

Re: First Omni 15 Full Range build...

#25 Post by All Thumbs »

Parts cut AGAIN for a new pair of horns to replace the ones I trashed this morning lol...

Image

Image
First time builder of 2 x Omni 15 Full Range - wish me luck :-)

Scott Whitley Bass Guitar Services
Web: http://www.scott-whitley.com
Facebook: http://www.facebook.com/scott.whitley.bass.services
Top
User avatar
All Thumbs
Posts: 72
Joined: Mon Feb 18, 2013 5:04 pm
Location: Burnley, UK
Contact:
Contact All Thumbs

Re: First Omni 15 Full Range build...

#26 Post by All Thumbs »

And here are the finished replacement horns. I shall very carefully trim them in the morning using the sled/jig I made today. Wish me luck...

Image
First time builder of 2 x Omni 15 Full Range - wish me luck :-)

Scott Whitley Bass Guitar Services
Web: http://www.scott-whitley.com
Facebook: http://www.facebook.com/scott.whitley.bass.services
Top
User avatar
AntonZ
Posts: 2700
Joined: Sun May 14, 2006 6:00 am
Location: NL

Re: First Omni 15 Full Range build...

#27 Post by AntonZ »

All Thumbs wrote:So I made a sled/jig....

Image
You are going to love that jig. Makes trimming of the horns so easy.

I built a WedgeHorn some time ago, which has a similar shaped but larger horn that needs to be trimmed down to fit the shell. Super tight fit, and it was dead easy.

Making great progress there Scott. I'm looking forward to you using the pair at full blast first time. Be sure to have some hearing protection. Structural damage to your house may occur :cowboy:
Top
User avatar
All Thumbs
Posts: 72
Joined: Mon Feb 18, 2013 5:04 pm
Location: Burnley, UK
Contact:
Contact All Thumbs

Re: First Omni 15 Full Range build...

#28 Post by All Thumbs »

AntonZ wrote:I'm looking forward to you using the pair at full blast first time. Be sure to have some hearing protection. Structural damage to your house may occur :cowboy:
Love it :-)
First time builder of 2 x Omni 15 Full Range - wish me luck :-)

Scott Whitley Bass Guitar Services
Web: http://www.scott-whitley.com
Facebook: http://www.facebook.com/scott.whitley.bass.services
Top
User avatar
All Thumbs
Posts: 72
Joined: Mon Feb 18, 2013 5:04 pm
Location: Burnley, UK
Contact:
Contact All Thumbs

Re: First Omni 15 Full Range build...

#29 Post by All Thumbs »

Excellent!!!! The jig/sled made the job 1000% easier :-)

Image

Image
First time builder of 2 x Omni 15 Full Range - wish me luck :-)

Scott Whitley Bass Guitar Services
Web: http://www.scott-whitley.com
Facebook: http://www.facebook.com/scott.whitley.bass.services
Top
User avatar
AntonZ
Posts: 2700
Joined: Sun May 14, 2006 6:00 am
Location: NL

Re: First Omni 15 Full Range build...

#30 Post by AntonZ »

They do indeed look quite a bit better than the first pair. Well done :clap:
Top
Post Reply

Return to “Build Threads”