What glues to use for reconing?

[x_mad]

I need to recone DL2510II but don't know what glues to use. Any advices would be appreciated

[Grant Bunter]

Google it,

There's a heap of different glues different people use.
Have you reconed before?

[x_mad]

No, I haven't recone before.

There's a heap of different glues different people use.

That's the biggest problem. I have recone guideline from Emi - 3 different glues are used. I'm outsideof US (Ukraine), so I want to find alternative glues in my country

[Bas Gooiker]

Use a cyanoacrylate glue. Should be available in woodworking shops etc. Or use 2 part epoxy, takes a lot longer to dry though.

It comes in different viscosity forms. Don't take the really thin one, to prevent it running everywhere.

[AntonZ]

Not from personal experience, but I have been told that the solvents in those reconing glues are not good for your health. So work outside, or vent extremely well. Perhaps there are masks of some sorts that also help protecting you from the harmful solvents.

[Tom Smit]

Mask with filters

[byacey]

I've been away from reconing for awhile, the most recent JBL kit came with some kind of low strength latex based glue. The old kit literally peeled out of the basket without any scraping involved.

In the old days we used this:

https://www.acklandsgrainger.com/AGIPor ... MM4799-5OZ

Very strong stuff. It's fine if you have good ventilation; avoid breathing the fumes.