Anyway my rig consists of four OT12's stacked per side and four T48's under the stage.
This is my OT12 stack on stands 1,6 metres high, feet have four pins per leg that get knocked into the ground, Local town engineer was ok with this setup.
Pic of the stage and the OT stacks on either side. camera lens makes the stacks look as if they are leaning towards the stage but trust me they are level.
System runs on Synq digital amps and as I've mentioned in another post these amps "ROCK"
Friday night weather was great and the main artist is a big hit with the younger crowds here in South Africa at the moment so a good turnout was expected.
The pre show acts were also rocking and the crowd started comming in a bit earlier and every time I turned around the crowd was getting larger and packing further and further back.
I started to stress a bit thinking that the rig might be a bit thin for this size crowd. The main act brought his own sound engineer and that gave me a gap to walk around and listen to the system at war volume with a large crowd present.
Everywhere I walked it was loud and clear, no dead spots. Even about a 100m back it was still clear and tight.
Went backstage and took a pic from the back side of the stage towards the crowd just to give you guys an idea of the audience size.
Saturday was also great and the compliments just kept on comming. This combination of OT12's and T48's are just awesome together.
Once again thanks Bill for the great designs, BFM rocks
Jose
I also run the same combo and I absolutely love it. For my bigger shows I will run 8 O-top12's per side and 8 V-plated 24" T48's want to talk about impress!
